A Sparkling Celebration Necklace & Earrings

Pearl Tassel Necklace

Cut five small one to two-inch sections of 1512 gold-filled flat cable chain.

String a pearl bead from the 5810 4mm Crystal Pearl Wedding Bells Designer blend onto either a gold-filled 1.5-inch 24 head pin with ball end or a sterling silver 1.25-inch 24 gauge ball-end head pin depending on what color the pearl is. Make a simple loop at the top of the bead. Repeat 17 times. String a 5mm XILION bicone in Crystal Golden Shadow onto a gold head pin and make a simple loop at the top of the bead. Repeat two times. String a 5mm XILION bicone in Greige onto a gold head pin and make a simple loop at the top. Repeat two times. String a 4mm XILION bicone in Crystal onto a silver head pin and make a simple loop at the top. Repeat two times.

Decorate your short chain tassels with the dangles you made in the previous step. Open the simple loops to attach them to the chain, then close the loops again once they are in place. Dangle all of the decorated chains from a gold-plated 4mm jump ring. Cut a length of chain approximately 20 inches. Attach your tassel to the center of the chain using another jump ring. Attach the gold-plated mini lobster clasp to the end of the chain using a jump ring. Attach a jump ring to the other end of the chain. Click to see our full selection of lobster clasps. 

Raindrop Pendant Necklace

Cut a length of jewelry wire approximately four inches long. Crimp one end to a 14K/20 gold-filled 3.0mm jump ring using a 14K/20 gold-filled 1x2mm crimp tube. Cover the crimp with a 14K/20 gold-filled 2.5mm crimp cover.

Crimp Cover Tutorial

String three pearls of the same color from the Wedding Bells Designer Blend onto the wire, followed by a 14mm XIRIUS raindrop pendant in Crystal Satin and three more pearls of the same color. Crimp the other end of the wire to a jump ring using a crimp tube and a crimp cover.

Cut open a link in the center of the 18-inch 1318 gold-filled cable chain necklace. Remove the cut link so that your necklace is now in two halves. You may choose to shorten the necklace; if so, cut an even number of links from each side of the necklace. Add one end of your beaded strand to one open end of the necklace using the jump ring already attached to the end of the strand. Do the same for the other open end of the necklace.

Silver Dangles Necklace

String a silver pearl from the Wedding Bells Designer Blend onto a sterling silver 24 gauge 1.25-inch ball-end head pin. Make a simple loop at the top of the bead. Repeat six times. String a 4mm XILION bicone in Crystal CAL onto a head pin and make a simple loop at the top of the bead. Repeat nine times.

Decorate the 925/10 silver-filled 18-inch oval cable chain necklace with the dangles you made in the previous step by opening and closing the simple loops. Our dangles are three links apart on the chain.

Heart Necklace

String the 17mm wild heart pendant in Crystal Rose Patina onto a small section of 18 gauge Artbeads Designer Wire in Rose Gold. Make a wrapped loop at the top of the pendant.

Cut a length of jewelry wire approximately six inches long. Crimp the end of the wire to a 1/20 14K rose gold-filled 3mm 22 gauge open jump ring using a 1/20 14K rose gold-filled 2x2mm crimp tube and a 3mm gold-filled crimp cover. String on a pearl from the Wedding Bells Designer Blend, followed by two 4mm faceted rounds in Silk. Then, string on four pearls in the same color as the first, followed by your heart pendant, four more pearls, two Silk rounds and one more pearl. Crimp the end of the wire to a jump ring using a crimp tube and cover.

Cut open a link in the center of the 14K/20 rose gold-filled 16-inch 1mm rope chain necklace. Remove the link so that your necklace is now in two halves. You may choose to shorten the necklace; if so, cut an even number of links from each side of the necklace. Add one end of your beaded strand to one open end of the necklace using the jump ring already attached to the end of the strand. Do the same for the other open end of the necklace.

Blend Used:
5810 4mm Crystal Pearl Wedding Bells Designer Blend (ADB0175, qty 1)

Pearl Tassel Necklace and Earrings:
5328 5mm XILION Bicone Crystal Golden Shadow (5328-CGS5, qty 7)
5328 5mm XILION Bicone Greige (5328-GRG5, qty 5)
5328 4mm XILION Bicone Crystal (5328-CRYS4, qty 3)
1512 Gold-Filled Flat Cable Chain (GFCH40, qty 3)
Sterling Silver 1.25-inch Ball-end Had Pin, 24 gauge (SS-BHP07, qty 22)
Gold-Filled 1.5-inch Head Pin with Ball End, 24 Gauge (FIND-0903, qty 25)
Gold-Plated Jump Ring 4mm (JR-G04, qty 6)
Gold-Plated Mini Lobster Clasp (CLASP12-GP, qty 1)
Ball End Earwire (GF-EAR15, qty 2)

Raindrop Pendant Necklace:
6022 14mm XIRIUS Raindrop Pendant Crystal Satin (6022-CST14, qty 1)
18-Inch 1318 Gold-Filled Cable Chain Necklace (GF-NECK02, qty 1)
14K/20 Gold-Filled Open Jump Ring 0.020 x .120 inches (0.5 x 3.0mm) (GF-OJR20-A, qty 2)
14K/20 Gold-Filled 1x2mm Crimp Tube (GF-CRM1, qty 2)
14K/20 Gold-Filled 2.5mm Crimp Cover (FIND-0022, qty 2)

Silver Necklace:
5328 4mm XILION Bicone Crystal CAL (5328-CAL4, qty 10)
925/10 Silver-Filled 18-Inch Oval Cable Chain Necklace (NECK-0038, qty 1)
Sterling Silver 1.25-inch Ball-end Head Pin, 24 gauge (SS-BHP07, qty 17)

Heart Necklace:
5000 4mm Faceted Round Silk (5000-SILK4, qty 4)
6240 17mm Wild Heart Pendant Crystal Rose Patina (6240-CRP17, qty 1)
14K/20 Rose Gold-Filled 16-Inch 1mm Rope Chain Necklace (NECK-0079, qty 1)
1/20 14K Rose Gold-Filled 3mm Open Jump Ring 22 Gauge (FIND-1503, qty 2)
1/20 14K Rose Gold-Filled 2x2mm Crimp Tube (FIND-1501, qty 2)
3mm Gold-Filled Crimp Cover (GF-CCOV01, qty 2)
Artbeads Designer Wire - Rose Gold Non-Tarnish 18 Gauge (14 ft. spool) (ADW0018, qty 1)