Cut a length of jewelry wire approximately 11 inches long. Slide a sterling silver 2x2mm crimp tube onto the end of the wire. Bring the wire through the last link of a 4.5-inch length of Antique Silver-Plated Brass Lacy Loop Chain and back through the crimp tube. Crimp in place.
Add the following pattern of beads to the wire:
Repeat this pattern two more times followed by three more Czech Glass Rondelle Beads.
Add the Sterling Silver Oval Tree Pendant to the wire using a Sterling Silver jump ring. Then create a mirror image of the beads on the other side of the pendant.
Slide a sterling silver 2x2mm crimp tube onto the end of the wire. Bring the wire through the last link of another 4.5-inch length of Antique Silver-Plated Brass Lacy Loop Chain and back through the crimp tube. Crimp in place.
Attach each half of the TierraCast Antique Pewter Flora Toggle Clasp Set to each end of chain using an antique silver-plated open jump ring for both.
List of Components
Czech Glass 12mm Ivory Opaque with Dark Bronze Wash Bird Coin Bead Strand by Raven's Journey (BEADS7580, qty 1)
Czech Glass 9 x 6mm Aqua Transparent and Ivory Opaque Mix with Antique Matte Silver Finish Faceted Rondelle Bead Strand by Raven's Journey (BEADS7645, qty 1)
Sterling Silver Oval Tree Pendant (925S0060, qty 1)
11mm Antique Silver-Plated Brass Lacy Loop Chain By the Foot (BTF1408, qty 2)
TierraCast Antique Silver Small Coiled Ring Spacer (SA-5595, qty 12)
TierraCast Antique Pewter Flora Toggle Clasp Set (PA-6223, qty 1)
Sterling Silver 2x2mm Crimp Tube (SS-CRM2, qty 2)
6mm Silver-Plated Open Jump Ring - 18 Gauge (FIND-0469, qty 1)
6mm Antique Silver-Plated Open Jump Ring - 18 Gauge (FIND-0468, qty 2)
Nice choice! All or most of the products needed for this project are shown below with quantities. Sometimes we sell out of components and aren’t able to order more from the manufacturer (we know, it is very disappointing to us, too). Use the opportunity to mix up the design and make it yours by substituting similar products or altering the entire color scheme—it’s up to you!
Cut a length of jewelry wire approximately 11 inches long. Slide a sterling silver 2x2mm crimp tube onto the end of the wire. Bring the wire through the last link of a 4.5-inch length of Antique Silver-Plated Brass Lacy Loop Chain and back through the crimp tube. Crimp in place.
Add the following pattern of beads to the wire:
Repeat this pattern two more times followed by three more Czech Glass Rondelle Beads.
Add the Sterling Silver Oval Tree Pendant to the wire using a Sterling Silver jump ring. Then create a mirror image of the beads on the other side of the pendant.
Slide a sterling silver 2x2mm crimp tube onto the end of the wire. Bring the wire through the last link of another 4.5-inch length of Antique Silver-Plated Brass Lacy Loop Chain and back through the crimp tube. Crimp in place.
Attach each half of the TierraCast Antique Pewter Flora Toggle Clasp Set to each end of chain using an antique silver-plated open jump ring for both.
List of Components
Czech Glass 12mm Ivory Opaque with Dark Bronze Wash Bird Coin Bead Strand by Raven's Journey (BEADS7580, qty 1)
Czech Glass 9 x 6mm Aqua Transparent and Ivory Opaque Mix with Antique Matte Silver Finish Faceted Rondelle Bead Strand by Raven's Journey (BEADS7645, qty 1)
Sterling Silver Oval Tree Pendant (925S0060, qty 1)
11mm Antique Silver-Plated Brass Lacy Loop Chain By the Foot (BTF1408, qty 2)
TierraCast Antique Silver Small Coiled Ring Spacer (SA-5595, qty 12)
TierraCast Antique Pewter Flora Toggle Clasp Set (PA-6223, qty 1)
Sterling Silver 2x2mm Crimp Tube (SS-CRM2, qty 2)
6mm Silver-Plated Open Jump Ring - 18 Gauge (FIND-0469, qty 1)
6mm Antique Silver-Plated Open Jump Ring - 18 Gauge (FIND-0468, qty 2)