Cut a length of jewelry wire approximately 10 inches long. Slide a gold-filled 2x2mm crimp tube onto the end of the wire. Bring the wire through the last link of a 4-inch length of Satin Hamilton Gold-Plated Textured Oval Link Chain and back through the crimp tube. Crimp in place.
Add the following pattern of beads to the wire:
Repeat this pattern two more times. Repeat the pattern a third time without the Czech Glass Bird Coin Bead.
Add the Nunn Design Antique Gold-Plated Pewter Large Daisy Pendant to the wire using a jump ring. Add beads to the wire so that it mirrors the beads on the other side of the pendant.
Slide a gold-filled 2x2mm crimp tube onto the end of the wire. Bring the wire through the last link of another 4-inch length of Satin Hamilton Gold-Plated Textured Oval Link Chain and back through the crimp tube. Crimp in place.
Attach each half of the TierraCast Antique Gold Del Sol Toggle Set to each end of chain using an oval jump ring for both.
List of Components
Czech Glass 5 x 3mm Turquoise Opaque and Purple Transparent Mix with Purple Gold Marbled Finish Faceted Rondelle Bead Strand by Raven's Journey (BEADS7648, qty 1)
Czech Glass 12mm Capri Blue Transparent Matte with Gold Wash Bird Coin Bead Strand by Raven's Journey (BEADS7583, qty 1)
Nunn Design Antique Gold-Plated Pewter Large Daisy Pendant Charm (ND0038, qty 1)
TierraCast 5mm Gold-Plated Pewter Plain Heishi Spacer (G-0441, qty 16)
TierraCast Antique Gold Del Sol Toggle Clasp (GA-6136, qty 1)
Satin Hamilton Gold-Plated Textured Oval Link Chain by the Foot (BTF-0062, qty 1)
Gold-Filled 14K/20 2 x 2mm Crimp Tube (GF-CRM2, qty 2)
TierraCast Gold-Plated Brass Large Oval Open Jump Ring (G-0019, qty 2)
TierraCast Small Gold-Plated Brass Open Round Jump Ring (GF-0024, qty 1)
Nice choice! All or most of the products needed for this project are shown below with quantities. Sometimes we sell out of components and aren’t able to order more from the manufacturer (we know, it is very disappointing to us, too). Use the opportunity to mix up the design and make it yours by substituting similar products or altering the entire color scheme—it’s up to you!
Cut a length of jewelry wire approximately 10 inches long. Slide a gold-filled 2x2mm crimp tube onto the end of the wire. Bring the wire through the last link of a 4-inch length of Satin Hamilton Gold-Plated Textured Oval Link Chain and back through the crimp tube. Crimp in place.
Add the following pattern of beads to the wire:
Repeat this pattern two more times. Repeat the pattern a third time without the Czech Glass Bird Coin Bead.
Add the Nunn Design Antique Gold-Plated Pewter Large Daisy Pendant to the wire using a jump ring. Add beads to the wire so that it mirrors the beads on the other side of the pendant.
Slide a gold-filled 2x2mm crimp tube onto the end of the wire. Bring the wire through the last link of another 4-inch length of Satin Hamilton Gold-Plated Textured Oval Link Chain and back through the crimp tube. Crimp in place.
Attach each half of the TierraCast Antique Gold Del Sol Toggle Set to each end of chain using an oval jump ring for both.
List of Components
Czech Glass 5 x 3mm Turquoise Opaque and Purple Transparent Mix with Purple Gold Marbled Finish Faceted Rondelle Bead Strand by Raven's Journey (BEADS7648, qty 1)
Czech Glass 12mm Capri Blue Transparent Matte with Gold Wash Bird Coin Bead Strand by Raven's Journey (BEADS7583, qty 1)
Nunn Design Antique Gold-Plated Pewter Large Daisy Pendant Charm (ND0038, qty 1)
TierraCast 5mm Gold-Plated Pewter Plain Heishi Spacer (G-0441, qty 16)
TierraCast Antique Gold Del Sol Toggle Clasp (GA-6136, qty 1)
Satin Hamilton Gold-Plated Textured Oval Link Chain by the Foot (BTF-0062, qty 1)
Gold-Filled 14K/20 2 x 2mm Crimp Tube (GF-CRM2, qty 2)
TierraCast Gold-Plated Brass Large Oval Open Jump Ring (G-0019, qty 2)
TierraCast Small Gold-Plated Brass Open Round Jump Ring (GF-0024, qty 1)