Cut a length of jewelry wire approximately 12 inches long. Slide a sterling silver 2x2mm crimp tube onto the end of the wire. Bring the wire through the last link of a 4-inch length of Silver Plated 22-Gauge Cable Chain and back through the crimp tube. Crimp in place.
Add the following beads to the wire:
Add the following pattern to the wire:
Repeat the pattern of beads one more time.
Add the Antique Silver-Plated Flamingo Pendant to the wire using a jump ring. Then add beads to the wire so that it mirrors the pattern of beads on the other side of the pendant.
Slide a sterling silver 2x2mm crimp tube onto the end of the wire. Bring the wire through the last link of another 4-inch length of Silver Plated 22-Gauge Cable Chain and back through the crimp tube. Crimp in place.
Attach each half of the TierraCast Antique Silver-Plated Pewter Toggle Set to each end of chain using a jump ring for both.
List of Components
Czech Glass 12mm Pink Silk with Dark Bronze Wash Bird Coin Bead Strand by Raven's Journey (BEADS7577, qty 1)
Czech Glass 6mm Opaque Luster Mix Fire-Polished Bead Strand by Starman (CFP-P10-6, qty 2)
Antique Silver-Plated Flamingo Pendant (PEND1665, qty 1)
TierraCast Silver 5mm Nugget Heishi Spacer (S-0435, qty 10)
Silver-Plated 6x5mm, 22 Gauge Cable Chain by the Foot (SPCH24, qty 1)
TierraCast 1/2-Inch Antique Silver-Plated Pewter Anna's Toggle and Clasp 18x12.5mm (SA-6154, qty 1)
Sterling Silver Open Jump Ring - 0.035 x .235 inches (0.90 x 5.95mm) (SS-OJR35-D, qty 3)
Sterling Silver 2x2mm Crimp Tube (SS-CRM2, qty 2)
Nice choice! All or most of the products needed for this project are shown below with quantities. Sometimes we sell out of components and aren’t able to order more from the manufacturer (we know, it is very disappointing to us, too). Use the opportunity to mix up the design and make it yours by substituting similar products or altering the entire color scheme—it’s up to you!
Cut a length of jewelry wire approximately 12 inches long. Slide a sterling silver 2x2mm crimp tube onto the end of the wire. Bring the wire through the last link of a 4-inch length of Silver Plated 22-Gauge Cable Chain and back through the crimp tube. Crimp in place.
Add the following beads to the wire:
Add the following pattern to the wire:
Repeat the pattern of beads one more time.
Add the Antique Silver-Plated Flamingo Pendant to the wire using a jump ring. Then add beads to the wire so that it mirrors the pattern of beads on the other side of the pendant.
Slide a sterling silver 2x2mm crimp tube onto the end of the wire. Bring the wire through the last link of another 4-inch length of Silver Plated 22-Gauge Cable Chain and back through the crimp tube. Crimp in place.
Attach each half of the TierraCast Antique Silver-Plated Pewter Toggle Set to each end of chain using a jump ring for both.
List of Components
Czech Glass 12mm Pink Silk with Dark Bronze Wash Bird Coin Bead Strand by Raven's Journey (BEADS7577, qty 1)
Czech Glass 6mm Opaque Luster Mix Fire-Polished Bead Strand by Starman (CFP-P10-6, qty 2)
Antique Silver-Plated Flamingo Pendant (PEND1665, qty 1)
TierraCast Silver 5mm Nugget Heishi Spacer (S-0435, qty 10)
Silver-Plated 6x5mm, 22 Gauge Cable Chain by the Foot (SPCH24, qty 1)
TierraCast 1/2-Inch Antique Silver-Plated Pewter Anna's Toggle and Clasp 18x12.5mm (SA-6154, qty 1)
Sterling Silver Open Jump Ring - 0.035 x .235 inches (0.90 x 5.95mm) (SS-OJR35-D, qty 3)
Sterling Silver 2x2mm Crimp Tube (SS-CRM2, qty 2)