Cut a length of jewelry wire approximately 8 inches long. Slide a sterling silver 2x2mm crimp tube onto the end of the wire. Bring the wire through the last link of a 5-inch length of Sterling Silver Textured Flat Cable Chain and back through the crimp tube. Crimp in place.
Add the following pattern to the wire:
Repeat this pattern one more time. Then add two Czech Glass 4mm Natural Rainbow Opaque Faceted Round Beads.
Add the Sterling Silver Starfish Charm to the wire using two jump rings. Then mirror the beads on the other side.
Slide a sterling silver 2x2mm crimp tube onto the end of the wire. Bring the wire through the last link of a 5-inch length of Sterling Silver Textured Flat Cable Chain and back through the crimp tube. Crimp in place.
Attach each half of the TierraCast Rhodium-Plated Pewter Toggle Set to each end of chain using a jump ring for both.
List of Components
TierraCast Rhodium-Plated Pewter Craftsman Toggle Set (RB-6205, qty 1)
Sterling Silver 15mm Starfish Charm (CHARM-4055, qty 1)
Sterling Silver Small Textured Flat Cable Chain (BTF1374, qty 1)
TierraCast Antique Silver 5mm Beaded Heishi Daisy Spacer (SA-0421, qty 8)
TierraCast Antique Silver-Plated Pewter Faceted Spacer Bead with 2mm Hole (SA-0451, qty 4)
Czech Glass 4mm Natural Rainbow Opaque Mix with Stone Finish Faceted Round Bead Strand by Raven's Journey (BEADS7659, qty 1)
Czech Glass 8 x 6mm Aqua Blue Silk with Picasso Finish Top Cut Faceted Drop Bead Strand by Raven's Journey (BEADS7693, qty 1)
Sterling Silver 2x2mm Crimp Tube Bead (SS-CRM2, qty 2)
Sterling Silver Open Jump Ring - 0.030 x .170 inches (0.75 x 4.30mm) (SS-OJR30-D, qty 4)
Nice choice! All or most of the products needed for this project are shown below with quantities. Sometimes we sell out of components and aren’t able to order more from the manufacturer (we know, it is very disappointing to us, too). Use the opportunity to mix up the design and make it yours by substituting similar products or altering the entire color scheme—it’s up to you!
Cut a length of jewelry wire approximately 8 inches long. Slide a sterling silver 2x2mm crimp tube onto the end of the wire. Bring the wire through the last link of a 5-inch length of Sterling Silver Textured Flat Cable Chain and back through the crimp tube. Crimp in place.
Add the following pattern to the wire:
Repeat this pattern one more time. Then add two Czech Glass 4mm Natural Rainbow Opaque Faceted Round Beads.
Add the Sterling Silver Starfish Charm to the wire using two jump rings. Then mirror the beads on the other side.
Slide a sterling silver 2x2mm crimp tube onto the end of the wire. Bring the wire through the last link of a 5-inch length of Sterling Silver Textured Flat Cable Chain and back through the crimp tube. Crimp in place.
Attach each half of the TierraCast Rhodium-Plated Pewter Toggle Set to each end of chain using a jump ring for both.
List of Components
TierraCast Rhodium-Plated Pewter Craftsman Toggle Set (RB-6205, qty 1)
Sterling Silver 15mm Starfish Charm (CHARM-4055, qty 1)
Sterling Silver Small Textured Flat Cable Chain (BTF1374, qty 1)
TierraCast Antique Silver 5mm Beaded Heishi Daisy Spacer (SA-0421, qty 8)
TierraCast Antique Silver-Plated Pewter Faceted Spacer Bead with 2mm Hole (SA-0451, qty 4)
Czech Glass 4mm Natural Rainbow Opaque Mix with Stone Finish Faceted Round Bead Strand by Raven's Journey (BEADS7659, qty 1)
Czech Glass 8 x 6mm Aqua Blue Silk with Picasso Finish Top Cut Faceted Drop Bead Strand by Raven's Journey (BEADS7693, qty 1)
Sterling Silver 2x2mm Crimp Tube Bead (SS-CRM2, qty 2)
Sterling Silver Open Jump Ring - 0.030 x .170 inches (0.75 x 4.30mm) (SS-OJR30-D, qty 4)