Cut a length of jewelry wire approximately 8 inches long. Slide a gold-filled 2x2mm crimp tube onto the end of the wire. Bring the wire through the last link of a 5-inch length of Satin Hamilton Gold-Plated Cable Chain and back through the crimp tube. Crimp in place.
Add one Czech glass 3mm Metallic Rainbow Mix Pressed Round Bead to the wire.
Add the following pattern to the wire:
Repeat the pattern one more time.
Add the following beads to the wire:
Add the Nunn Design Guadalupe Charm to the wire using a jump ring. Mirror the beads on the other side of the charm.
Slide a gold-filled 2x2mm crimp tube onto the end of the wire. Bring the wire through the last link of a 5-inch length of Satin Hamilton Gold-Plated Cable Chain and back through the crimp tube. Crimp in place.
Attach each half of the Nunn Design toggle clasp set to each end of the chain using a gold-filled jump ring for both.
List of Components
Nunn Design Antique Gold-Plated Pewter Guadalupe Charm (CHARM-4200, qty 1)
Nunn Design Gold-Plated Pewter Small Hammered Toggle Clasp Set (CLASP-0727, qty 1)
Czech Glass Mountain Blue Transparent with Picasso Finish Top Cut Faceted Drop Bead Strand by Raven's Journey (BEADS7691, qty 1)
Czech Glass 3mm Metallic Rainbow Opaque Mix Pressed Round Bead Strand by Raven's Journey(BEADS7603, qty 1)
Czech Glass 4mm Sage Green Transparent Matte with Luster Faceted Round Bead Strand by Raven's Journey (BEADS7660, qty 1)
TierraCast Oxidized Brass-Plated 3mm Faceted Heishi Spacer (BRO-0422, qty 10)
Satin Hamilton Gold-Plated 6x5mm, 22 Gauge Cable Chain by the Foot(BTF-0072, qty 1)
Gold-Filled 14K/20 2x2mm Crimp Tube (GF-CRM2, qty 2)
Gold-Filled 14K/20 5mm 19.5 Guage Precision Cut Jump Ring (FIND2989, qty 3)
Nice choice! All or most of the products needed for this project are shown below with quantities. Sometimes we sell out of components and aren’t able to order more from the manufacturer (we know, it is very disappointing to us, too). Use the opportunity to mix up the design and make it yours by substituting similar products or altering the entire color scheme—it’s up to you!
Cut a length of jewelry wire approximately 8 inches long. Slide a gold-filled 2x2mm crimp tube onto the end of the wire. Bring the wire through the last link of a 5-inch length of Satin Hamilton Gold-Plated Cable Chain and back through the crimp tube. Crimp in place.
Add one Czech glass 3mm Metallic Rainbow Mix Pressed Round Bead to the wire.
Add the following pattern to the wire:
Repeat the pattern one more time.
Add the following beads to the wire:
Add the Nunn Design Guadalupe Charm to the wire using a jump ring. Mirror the beads on the other side of the charm.
Slide a gold-filled 2x2mm crimp tube onto the end of the wire. Bring the wire through the last link of a 5-inch length of Satin Hamilton Gold-Plated Cable Chain and back through the crimp tube. Crimp in place.
Attach each half of the Nunn Design toggle clasp set to each end of the chain using a gold-filled jump ring for both.
List of Components
Nunn Design Antique Gold-Plated Pewter Guadalupe Charm (CHARM-4200, qty 1)
Nunn Design Gold-Plated Pewter Small Hammered Toggle Clasp Set (CLASP-0727, qty 1)
Czech Glass Mountain Blue Transparent with Picasso Finish Top Cut Faceted Drop Bead Strand by Raven's Journey (BEADS7691, qty 1)
Czech Glass 3mm Metallic Rainbow Opaque Mix Pressed Round Bead Strand by Raven's Journey(BEADS7603, qty 1)
Czech Glass 4mm Sage Green Transparent Matte with Luster Faceted Round Bead Strand by Raven's Journey (BEADS7660, qty 1)
TierraCast Oxidized Brass-Plated 3mm Faceted Heishi Spacer (BRO-0422, qty 10)
Satin Hamilton Gold-Plated 6x5mm, 22 Gauge Cable Chain by the Foot(BTF-0072, qty 1)
Gold-Filled 14K/20 2x2mm Crimp Tube (GF-CRM2, qty 2)
Gold-Filled 14K/20 5mm 19.5 Guage Precision Cut Jump Ring (FIND2989, qty 3)