This layered necklace features lush Dakota Stones gemstone beads and is featured in our Bead of the Month Calendar!
Cut a length of jewelry wire approximately 20 inches long. Slide a crimp tube onto the end of the wire, followed by one oval jump ring. Bring the wire back through the crimp tube and crimp in place.
Add the following pattern to the wire:
Repeat this pattern 4 times.
Add a crimp tube to the end of your strand, followed by a spring ring. Bring the wire back through the crimp tube and crimp in place. Attach this necklace to the first loop on the layered necklace tube clasp.
Cut a length of jewelry wire approximately 22 inches long. Slide a crimp tube onto the end of the wire, followed by a closed jump ring. Bring the wire back through the crimp tube and crimp in place. Then, add the following pattern to the wire:
Add a hematite bead, a freeform oval bead, and an 8mm faceted round to a head pin and make a wrapped loop at the top of the beads. Attach this dangle to the TierraCast hoop charm using an oval jump ring. Attach the 5mm jump ring to the loop at the top of the hoop charm.
Add a crimp tube to the end of your strand, followed by a spring ring. Bring the wire back through the crimp tube and crimp in place. Attach this necklace to the last loop on the layered necklace tube clasp. Check how your necklace lays and if you need to adjust the length of any strands, you can add jump rings to the ends of the strands.
Cut a length of jewelry wire approximately 24 inches. Slide a crimp tube onto the end, followed by a closed jump ring. Bring the wire back through the crimp tube and crimp in place. Add the following pattern to the wire:
Repeat this pattern 5 times, then add 1 hematite bead, 1 gold Demi Round, 1 bronze Demi Round, 1 gold Demi Round, 1 hematite bead, 1 gold Demi Round, 1 8mm faceted round, 1 gold Demi Round, 1 hematite bead, and 1 gold Demi Round. Add your hoop charm focal and then make a mirror image of the entire bead pattern on the other side of the focal.
Nice choice! All or most of the products needed for this project are shown below with quantities. Sometimes we sell out of components and aren’t able to order more from the manufacturer (we know, it is very disappointing to us, too). Use the opportunity to mix up the design and make it yours by substituting similar products or altering the entire color scheme—it’s up to you!
This layered necklace features lush Dakota Stones gemstone beads and is featured in our Bead of the Month Calendar!
Cut a length of jewelry wire approximately 20 inches long. Slide a crimp tube onto the end of the wire, followed by one oval jump ring. Bring the wire back through the crimp tube and crimp in place.
Add the following pattern to the wire:
Repeat this pattern 4 times.
Add a crimp tube to the end of your strand, followed by a spring ring. Bring the wire back through the crimp tube and crimp in place. Attach this necklace to the first loop on the layered necklace tube clasp.
Cut a length of jewelry wire approximately 22 inches long. Slide a crimp tube onto the end of the wire, followed by a closed jump ring. Bring the wire back through the crimp tube and crimp in place. Then, add the following pattern to the wire:
Add a hematite bead, a freeform oval bead, and an 8mm faceted round to a head pin and make a wrapped loop at the top of the beads. Attach this dangle to the TierraCast hoop charm using an oval jump ring. Attach the 5mm jump ring to the loop at the top of the hoop charm.
Add a crimp tube to the end of your strand, followed by a spring ring. Bring the wire back through the crimp tube and crimp in place. Attach this necklace to the last loop on the layered necklace tube clasp. Check how your necklace lays and if you need to adjust the length of any strands, you can add jump rings to the ends of the strands.
Cut a length of jewelry wire approximately 24 inches. Slide a crimp tube onto the end, followed by a closed jump ring. Bring the wire back through the crimp tube and crimp in place. Add the following pattern to the wire:
Repeat this pattern 5 times, then add 1 hematite bead, 1 gold Demi Round, 1 bronze Demi Round, 1 gold Demi Round, 1 hematite bead, 1 gold Demi Round, 1 8mm faceted round, 1 gold Demi Round, 1 hematite bead, and 1 gold Demi Round. Add your hoop charm focal and then make a mirror image of the entire bead pattern on the other side of the focal.