Create personalized jewelry with zodiac charms!
Add an 8mm Ruby Apatite bead to a brass eye pin and make a simple loop at the top of the bead. Repeat 5 times for a total of 6 ruby apatite links.
Cut a length of brass chain approximately 5 1/2 inches long. Attach one half of the toggle clasp to one end of the chain using a jump ring. Attach a ruby apatite link to the other end of the chain.
Attach a ruby apatite link to the end of the first link. Then, attach another link to the end of this one.
Attach a 4 1/2-inch length of chain to the last ruby apatite link. Attach the Taurus charm to the center of this chain using a jump ring.
Attach a ruby apatite link to the end of this chain. Then, attach another link to the end of this one. Attach another link to the end of the second one.
Attach a 5 1/2-inch length of chain to the last ruby apatite link. Attach the other half of the clasp to the end of this chain using a jump ring.
Cut a length of jewelry wire approximately 20 inches long. Slide a crimp tube onto the end of the wire. Bring the wire end through the jump ring on one side of your necklace. Bring the wire back through the crimp tube and crimp in place to attach this strand to the necklace.
Add 20 fire-polished beads to the jewelry wire and then add the following pattern:
Repeat this pattern 6 times, adding 20 fire-polished beads to the end of the sequence instead of the last 5.
Slide a crimp tube onto the end of the wire. Bring the wire end through the jump ring on the other side of the necklace. Bring the wire back through the crimp tube and crimp in place.
Antique Silver-Plated Brass Etched Figaro Chain By the Foot (BTF-0755, qty 2) (Or, try BTF-0760)
2-inch Antique Brass-Plated 20 Gauge Eye Pin (BBA-EP20-22, qty 6)
TierraCast Antique Gold-Plated Pewter Granulated Bead (GA-0447, qty 14) (Or, try GA-0447)
Dakota Stones Ruby Apatite 8mm Round Bead Strand (R1347, qty 1) (Or, try R1193)
TierraCast 5/8-Inch Brass Oxide Pewter Anna's Toggle and Clasp 21x16mm (BRO-6157, qty 1)
Czech Glass 4mm Goldenrod - Picasso Fire-Polished Bead Strand by Starman (CFP-T13740-4, qty 2) (Or, try CFP-T93500-4)
Dakota Stones Wild Horse Picture Jasper 6mm Round Bead Strand (R1645, qty 1) (Or, try R1056)
Czech Glass 5 x 3mm Fuchsia Pink and Crystal Mix with Picasso Finish Rondelle Bead Strand by Raven's Journey (BEADS-4149, qty 1) (Or, try BEADS-4143)
TierraCast 2x2mm Brass Oxide Brass Crimp Tube (BRO-0030, qty 2)
TierraCast 6mm Brass Oxide Open Round Jump Ring (BRO-0025, qty 3)
TierraCast Antique Gold-Plated Pewter Taurus Charm (GA-2471, qty 1) (Or, try SA-2471)
Nice choice! All or most of the products needed for this project are shown below with quantities. Sometimes we sell out of components and aren’t able to order more from the manufacturer (we know, it is very disappointing to us, too). Use the opportunity to mix up the design and make it yours by substituting similar products or altering the entire color scheme—it’s up to you!
Create personalized jewelry with zodiac charms!
Add an 8mm Ruby Apatite bead to a brass eye pin and make a simple loop at the top of the bead. Repeat 5 times for a total of 6 ruby apatite links.
Cut a length of brass chain approximately 5 1/2 inches long. Attach one half of the toggle clasp to one end of the chain using a jump ring. Attach a ruby apatite link to the other end of the chain.
Attach a ruby apatite link to the end of the first link. Then, attach another link to the end of this one.
Attach a 4 1/2-inch length of chain to the last ruby apatite link. Attach the Taurus charm to the center of this chain using a jump ring.
Attach a ruby apatite link to the end of this chain. Then, attach another link to the end of this one. Attach another link to the end of the second one.
Attach a 5 1/2-inch length of chain to the last ruby apatite link. Attach the other half of the clasp to the end of this chain using a jump ring.
Cut a length of jewelry wire approximately 20 inches long. Slide a crimp tube onto the end of the wire. Bring the wire end through the jump ring on one side of your necklace. Bring the wire back through the crimp tube and crimp in place to attach this strand to the necklace.
Add 20 fire-polished beads to the jewelry wire and then add the following pattern:
Repeat this pattern 6 times, adding 20 fire-polished beads to the end of the sequence instead of the last 5.
Slide a crimp tube onto the end of the wire. Bring the wire end through the jump ring on the other side of the necklace. Bring the wire back through the crimp tube and crimp in place.
Antique Silver-Plated Brass Etched Figaro Chain By the Foot (BTF-0755, qty 2) (Or, try BTF-0760)
2-inch Antique Brass-Plated 20 Gauge Eye Pin (BBA-EP20-22, qty 6)
TierraCast Antique Gold-Plated Pewter Granulated Bead (GA-0447, qty 14) (Or, try GA-0447)
Dakota Stones Ruby Apatite 8mm Round Bead Strand (R1347, qty 1) (Or, try R1193)
TierraCast 5/8-Inch Brass Oxide Pewter Anna's Toggle and Clasp 21x16mm (BRO-6157, qty 1)
Czech Glass 4mm Goldenrod - Picasso Fire-Polished Bead Strand by Starman (CFP-T13740-4, qty 2) (Or, try CFP-T93500-4)
Dakota Stones Wild Horse Picture Jasper 6mm Round Bead Strand (R1645, qty 1) (Or, try R1056)
Czech Glass 5 x 3mm Fuchsia Pink and Crystal Mix with Picasso Finish Rondelle Bead Strand by Raven's Journey (BEADS-4149, qty 1) (Or, try BEADS-4143)
TierraCast 2x2mm Brass Oxide Brass Crimp Tube (BRO-0030, qty 2)
TierraCast 6mm Brass Oxide Open Round Jump Ring (BRO-0025, qty 3)
TierraCast Antique Gold-Plated Pewter Taurus Charm (GA-2471, qty 1) (Or, try SA-2471)