Pretty in Pink

NOTE: The original project was made with Indian Pink crystals, which are not available anymore. We have substituted Rose crystals in the supplies list. Glue a SS34 rose flatback in Indian Pink into a TierraCast rhodium-plated pewter SS34 stepped glue-in bezel charm using epoxy adhesive. Repeat with the five other charms and flatbacks. Allow to dry and set aside for now.

Using Two-Part Epoxy Adhesive Video Tutorial

Cut the TierraCast antique silver-plated brass 8x5mm cable chain into one 1-inch piece and one 6-inch piece. Set aside for now.

Cut four lengths of jewelry wire approximately 9 inches long each.

Add a sterling silver 2x2mm crimp tube to one of the pieces of jewelry wire. Then, add the wire to the first hole on the TierraCast silver antique beaded 5-1 link. Bring the wire back through the crimp tube and crimp in place. Add a sterling silver 3mm crimp cover to hide the crimp. Slide on one 4mm faceted round in Indian Pink, 23 6mm faceted round Indian Pink beads, and one more 4mm faceted round. Add a crimp tube and bring the wire through the first hole on the other beaded link. Bring the wire back through the crimp tube and crimp in place. Hide with a crimp cover. Repeat this step, attaching the strand to the 5th hole on the beaded links.

Crimp Tool Tutorial
Crimp Tube Video Tutorial
Crimp Cover Tutorial

Slide a crimp tube onto another piece of wire, and bring the wire through the 2nd hole of the beaded link. Crimp to close and add a crimp coer. Slide on 37 Indian Pink 4mm rounds. Add a crimp tube and bring the wire through the 2nd hole on the other beaded link. Crimp to close and add a crimp cover. Repeat this step, attaching the strand to the 4th hole on the beaded links.

Using the 6-inch piece of chain, open one link at each end and attach to the 3rd or center holes on the beaded links. Randomly attach the drops made in step 2 to the chain using a 925/10 silver-filled 5mm 20 gauge open jump ring for each drop.

Opening and Closing Jump Rings Video

Slide a 6mm faceted round onto a 925/10 silver-filled 22 gauge 2-inch head pin and make a wrapped or simple loop at the top of the bead. Attach this bead dangle to the end of the 1-inch chain. You can either open the last link of chain or use a jump ring to attach. Using the other end of the chain, open the last link and attach to the end of the beaded link.

Wrapped Loop Tutorial
Simple Loop Tutorial

Attach the sterling silver 13mm oval trigger swivel clasp to the other end of the bracelet using an 8mm stainless steel 18 gauge open jump ring.

List of Components
The original project was made with Indian Pink crystals, which are not available anymore. We have substituted Rose crystals in the supplies list.
SS34 Rose Flatback Indian Pink (2088-INP34, qty 6) (Not available anymore, try 2088-LRO34)
4mm Faceted Round Indian Pink (5000-INP4, qty 78) (Or, try 5000-RO4)
6mm Faceted Round Indian Pink (5000-INP6, qty 47) (Not available anymore, try 5000-RO6)
TierraCast White-Bronze-Plated Pewter SS34 Glue-In Bezel Charm (WB-2426, qty 6)
TierraCast Silver Antique Beaded 5-1 Link (SA-3056, qty 2)
Silver-Plated 8x7mm, 15 Gauge Cable Chain by the Foot (SPCH38, qty 1)
8mm Stainless Steel 18 gauge Open Jump Ring (FIND-1794, qty 1)
925/10 Silver-Filled 5mm Open Jump Ring, 20 Gauge (FIND-0703, qty 6)
925/10 Silver-Filled 2-Inch Head Pin, 22 Gauge (FIND-0700, qty 1)
Sterling Silver 14mm Oval Swivel Clasp (CLASP1051, qty 1)
Sterling Silver 2 x 2mm Crimp Tube (SS-CRM2, qty 8)
Sterling Silver 3mm Crimp Cover (SS-CCOV01, qty 8)