I couldn't stop adding more mermaid touches to this necklace. There are bubbly Iridescent Dove Grey crystal pearls, vintage bead dangles, flowy silk ribbon, and of course a magical mermaid hiding in the clamshell pendant.
Vintage beads create an inspiring start for this necklace. Becky combined purple and light blue vintage beads in this design. Because these beads have a pearlescent theme, she went with a mermaid theme completed perfectly with the Green Girl Studios pendant at the center. You can watch Becky and Cynthia make this necklace and other pieces with the vintage beads on our Facebook page.
Cut a length of jewelry wire approximately 12 inches long. Slide a sterling silver 2x2mm crimp tube onto one end, followed by the last link of a 4 1/2-inch length of antique silver-plated small oval link chain. Bring the wire back through the crimp tube and crimp in place.
One TOHO 6/0 Demi Round bead in PermaFinish silver-lined frosted crystal
One Vintage pearlescent light blue 4mm round bead
One Demi Round
One purple round
One 6mm Bicone in Tanzanite
One purple round
One Demi Round
One light blue round
One Demi Round
One purple round
One 12mm coin crystal pearl in Iridescent Dove Grey
One purple round
One Demi Round
One light blue round
One Demi Round
One purple round
One coin pearl
One Demi Round
One bicone
One Demi Round
One 8mm round crystal pearl in Iridescent Dove Grey
Three light blue rounds
Make a mirror image of the bead pattern on the other side of the three light blue rounds.
Slide a crimp tube onto the end of the wire, followed by a 4 1/2-inch length of chain. Bring the wire back through the crimp tube and crimp in place.
Attach two linked sterling silver 6.10mm open jump rings to the Green Girl Studios pewter mermaid clamshell charm. Attach this pendant to the center of your necklace using two more jump rings (these jump rings are not linked, but one to each side of the center pearl).
Slide a purple round bead onto a sterling silver 1.0-inch ball-end 24 gauge head pin and attach it to one of the jump rings at the top of your pendant by making a wrapped loop. Repeat to make three other dangles. We made a dangle featuring a single light blue round bead, a dangle with a purple round, a light blue round, and a purple round, and a third dangle with a light blue round, a Demi Round, and a light blue round.
Attach each half of the TierraCast antique pewter heirloom toggle set to each end of the necklace using a jump ring for each.
Cut a hand-dyed silk kaleidoscope colors with grey edges ribbon in half. Thread one ribbon in and out of the larger chain links on one side of your necklace. Knot the ribbon around each end of chain and trim the ends. Add a little adhesive to secure the knot if desired, or stitch it in place. Repeat for the other side of the necklace.
Slide a purple round onto a head pin and attach to the first small link of the chain on one side of your necklace by making a wrapped loop. Repeat for each small link in the chain, alternating between purple and light blue beads for your dangle. Repeat on the other side of the necklace.
List of Components Vintage Pearlescent Purple 4mm Round Bead Strand (VINTOHO2, qty 1) Vintage Pearlescent Light Blue 4mm Round Bead Strand (VINTOHO4, qty 1) Green Girl Studios Pewter Mermaid Clamshell Charm (CHARM-4419, qty 1) 5860 12mm Coin Crystal Pearl Iridescent Dove Grey (5860-IDG12, qty 4) 5810 8mm Round Crystal Pearl Iridescent Dove Grey (5810-IDG8, qty 2) 5328 6mm Bicone Tanzanite (5328-TAN6, qty 4) TOHO Demi Round Bead 6/0 PermaFinish Silver-Lined Frosted Crystal 2.5-Inch Tube (TBDMR6-PF21F, qty 1) Antique Silver-Plated Small Oval Link Chain (SPACH14, qty 1) Hand-Dyed Silk Kaleidoscope Colors with Grey Edges (STRNG-0056, qty 1) Sterling Silver Open Jump Ring - 0.035 x .240 inches (0.90 x 6.10mm) (SS-OJR35-E, qty 6) Sterling Silver 1.0-inch Ball-end Head Pin, 24 gauge (SS-BHP06, qty 24) 3-inch Head Pin, 22 Gauge (Sterling Silver) (SS-HP23, qty 2) Sterling Silver 2 x 2mm Crimp Tube (SS-CRM2, qty 2) TierraCast Antique Pewter Heirloom Toggle Set (PA-6070, qty 1)
Add all available items to your cart at once or edit the quantities below.
Any items with quantities lower than stated minimums will default to the minimum in your cart.
Nice choice! All or most of the products needed for this project are shown
below with quantities. Sometimes we sell out of components and aren’t able to order more from
the manufacturer (we know, it is very disappointing to us, too). Use the opportunity to mix up
the design and make it yours by substituting similar products or altering the entire color
scheme—it’s up to you!
Please wait while we add the products to your cart.
Mermaid Bubbles Necklace Tutorial
Green Girl Studio Mermaid Pendant Necklace with Vintage Beads, Crystal pearls, and Silk Ribbon
designed byBecky Dahl
Skill LevelBeginner
TechniqueSimple Stringing
Time1-3 Hours
Approximate Size18 Inches
I couldn't stop adding more mermaid touches to this necklace. There are bubbly Iridescent Dove Grey crystal pearls, vintage bead dangles, flowy silk ribbon, and of course a magical mermaid hiding in the clamshell pendant.
Vintage beads create an inspiring start for this necklace. Becky combined purple and light blue vintage beads in this design. Because these beads have a pearlescent theme, she went with a mermaid theme completed perfectly with the Green Girl Studios pendant at the center. You can watch Becky and Cynthia make this necklace and other pieces with the vintage beads on our Facebook page.
Sterling Silver 2 x 2mm Crimp Tube Bead - Min Qty 10
Code SS-CRM2
$0.12
$0.14
×2
Bead Crimper Tool
Code TOOL-100
$13.09
×1
3-inch Head Pin, 22 Gauge (Sterling Silver) - Min Qty 2
Code SS-HP23
$0.65
$0.81
×2
Green Girl Studios Pewter Mermaid Clamshell Charm
Code CHARM-4419
$7.60
$9.49
×1
Sterling Silver Open Jump Ring - 0.035 x .240 inches (0.90 x 6.10mm) - Min Qty 4
Code SS-OJR35-E
$0.36
$0.45
×6
Beadalon Round Nose and Bent Chain Nose Multipliers
Code TOOL-0306
$21.89
×1
German Chain Nose Pliers
Code TOOL-500
$28.79
×1
Hand-Dyed Silk Ribbon Kaleidoscope Colors with Grey Edges (32-36 Inches)
Code STRNG-0056
$8.79
×1
PRESTIGE 5328 6mm Bicone Bead Tanzanite - Min Qty 4
Code 5328-TAN6
$0.38
×4
PRESTIGE 5810 8mm Round Crystal Pearl Iridescent Dove Grey - Min Qty 4
Code 5810-IDG8
$0.42
×2
Antique Silver-Plated Small Oval Link Chain by the Foot
Code SPACH14
$2.16
$2.69
×1
Sterling Silver 1.0-inch Ball-end Head Pin, 24 gauge - Min Qty 4
Code SS-BHP06
$0.35
$0.43
×24
Step-by-Step Instructions
Cut a length of jewelry wire approximately 12 inches long. Slide a sterling silver 2x2mm crimp tube onto one end, followed by the last link of a 4 1/2-inch length of antique silver-plated small oval link chain. Bring the wire back through the crimp tube and crimp in place.
One TOHO 6/0 Demi Round bead in PermaFinish silver-lined frosted crystal
One Vintage pearlescent light blue 4mm round bead
One Demi Round
One purple round
One 6mm Bicone in Tanzanite
One purple round
One Demi Round
One light blue round
One Demi Round
One purple round
One 12mm coin crystal pearl in Iridescent Dove Grey
One purple round
One Demi Round
One light blue round
One Demi Round
One purple round
One coin pearl
One Demi Round
One bicone
One Demi Round
One 8mm round crystal pearl in Iridescent Dove Grey
Three light blue rounds
Make a mirror image of the bead pattern on the other side of the three light blue rounds.
Slide a crimp tube onto the end of the wire, followed by a 4 1/2-inch length of chain. Bring the wire back through the crimp tube and crimp in place.
Attach two linked sterling silver 6.10mm open jump rings to the Green Girl Studios pewter mermaid clamshell charm. Attach this pendant to the center of your necklace using two more jump rings (these jump rings are not linked, but one to each side of the center pearl).
Slide a purple round bead onto a sterling silver 1.0-inch ball-end 24 gauge head pin and attach it to one of the jump rings at the top of your pendant by making a wrapped loop. Repeat to make three other dangles. We made a dangle featuring a single light blue round bead, a dangle with a purple round, a light blue round, and a purple round, and a third dangle with a light blue round, a Demi Round, and a light blue round.
Attach each half of the TierraCast antique pewter heirloom toggle set to each end of the necklace using a jump ring for each.
Cut a hand-dyed silk kaleidoscope colors with grey edges ribbon in half. Thread one ribbon in and out of the larger chain links on one side of your necklace. Knot the ribbon around each end of chain and trim the ends. Add a little adhesive to secure the knot if desired, or stitch it in place. Repeat for the other side of the necklace.
Slide a purple round onto a head pin and attach to the first small link of the chain on one side of your necklace by making a wrapped loop. Repeat for each small link in the chain, alternating between purple and light blue beads for your dangle. Repeat on the other side of the necklace.
List of Components Vintage Pearlescent Purple 4mm Round Bead Strand (VINTOHO2, qty 1) Vintage Pearlescent Light Blue 4mm Round Bead Strand (VINTOHO4, qty 1) Green Girl Studios Pewter Mermaid Clamshell Charm (CHARM-4419, qty 1) 5860 12mm Coin Crystal Pearl Iridescent Dove Grey (5860-IDG12, qty 4) 5810 8mm Round Crystal Pearl Iridescent Dove Grey (5810-IDG8, qty 2) 5328 6mm Bicone Tanzanite (5328-TAN6, qty 4) TOHO Demi Round Bead 6/0 PermaFinish Silver-Lined Frosted Crystal 2.5-Inch Tube (TBDMR6-PF21F, qty 1) Antique Silver-Plated Small Oval Link Chain (SPACH14, qty 1) Hand-Dyed Silk Kaleidoscope Colors with Grey Edges (STRNG-0056, qty 1) Sterling Silver Open Jump Ring - 0.035 x .240 inches (0.90 x 6.10mm) (SS-OJR35-E, qty 6) Sterling Silver 1.0-inch Ball-end Head Pin, 24 gauge (SS-BHP06, qty 24) 3-inch Head Pin, 22 Gauge (Sterling Silver) (SS-HP23, qty 2) Sterling Silver 2 x 2mm Crimp Tube (SS-CRM2, qty 2) TierraCast Antique Pewter Heirloom Toggle Set (PA-6070, qty 1)