Use Hiilos clasps to create interchangeable bracelet stacks with fun beads like TOHO Aiko seed beads, Miyuki Tila Beads, Czech glass, and more.
Cut a length of jewelry wire approximately 12 inches long. Slide a crimp tube onto the end of the wire, followed by a seed bead from the Satin Sunset Aiko Seed Bead Mix. Bring the wire back through the crimp tube and crimp in place. Add a random pattern of seed beads to the wire until the strand is the desired length, keeping in mind the Hiilos clasp will add some length. Then, add a crimp tube and a seed bead to the end of the wire. Bring the wire back through the crimp tube and crimp in place.
Cut a length of TOHO Amiet beading thread approximately 24 inches long. Make a double knot at one end. Then, add a Czech glass bead from the Artbeads 4mm Royal Castle Designer Czech Glass Blend to the thread. Make a knot at the other end of the bead. Then, add a Czech glass 5x3mm seafoam green and white silk mix with purple bronze finish faceted rondelle bead. Knot at the end of the bead. Repeat adding a Royal Castle bead, knotting, adding a rondelle, and knotting until the strand is the desired length. Make a double knot at the end of the strand.
Pearl Knotting Text Tutorial
Pearl Knotting with a Clasp Text Tutorial
Knotter Tool Video Tutorial
Use pliers to gently open an 11mm tube for Hiilos interchangeable clasps. Add the knotted strand to the tube by sliding the double knot at the end of the strand into the tube. Then, add the seed bead strand by adding the seed bead at a crimped end of the strand into the tube. Close the ends of the tube and squeeze the tube shut. Repeat on the other ends of the strands with another tube.
How to Finish a Beaded Strand for a Hiilos Interchangeable Clasp Video
Use pliers to gently open an 11mm tube. Add the Half Tila strand into the tube. Close the ends of the tube and squeeze the tube shut. Repeat on the other end of the strand with another tube.
Cut a length of jewelry wire approximately 12 inches long. Slide a crimp tube onto the end of the wire, followed by a seed bead. Bring the wire back through the crimp tube and crimp in place. Add a random pattern of Royal Castle beads to the strand until it is the desired length. Then, add a crimp tube and seed bead to the strand. Bring the wire back through the crimp tube and crimp in place.
Cut a length of jewelry wire approximately 12 inches long. Slide a crimp tube onto the end of the wire, followed by a seed bead. Bring the wire back through the crimp tube and crimp in place. Add a Royal Castle bead, a Czech rondelle, a Czech glass Aster coin bead, a rondelle bead, a Royal Castle bead, and a Czech glass hibiscus bead to the strand. Repeat this pattern until the strand is the desired length. Add a crimp tube to the wire followed by a seed bead. Bring the wire back through the crimp tube and crimp in place.
Use pliers to gently open an 11mm tube for Hiilos interchangeable clasps. Add the Royal Castle strand to the tube by sliding the seed bead at the end of the strand into the tube. Then, add the Flower bead strand by adding the seed bead at a crimped end of the strand into the tube. Close the ends of the tube and squeeze the tube shut. Repeat on the other ends of the strands with another tube.
Cut a length of brass chain to the desired length for a bracelet strand. Add a jump ring to one end of the chain. With the jump ring still open, add a seed bead. Close the jump ring. Repeat on the other end of the chain.
Cut two strands of jewelry wire each 12 inches long. Slide a crimp tube onto the end of each wire, followed by a seed bead for each. Bring each wire through its respective crimp tube and crimp each in place. Add a Miyuki opaque luster peach Half Tila Bead to both wires, followed by a Miyuki metallic bronze Tila Bead, a peach Half Tila, a matte metallic Half Tila, a Miyuki light caramel pearl Tila bead, and a matte metallic Half Tila Bead. Repeat this pattern until the strand is the desired length. Then, add a crimp tube and a seed bead to each end of wire. Bring each wire back through its crimp tube and crimp in place.
Use pliers to gently open an 11mm tube for Hiilos interchangeable clasps. Add the Tila strand to the tube by sliding the seed beads at the end of the strands into the tube. Then, add the chain strand by adding the seed bead on the jump ring into the tube. Close the ends of the tube and squeeze the tube shut. Repeat on the other ends of the strands with another tube.
Working with a comfortable length of thread and a needle, add 14 seed beads to the thread. These will be your first two rows of your even-count peyote stitch band. Continue the stitch to the desired length using random colors of seed beads. Then finish and trim your thread.
Even Count Peyote Stitch PDF Diagram
Even Count Peyote Stitch Text Tutorial
Even Count Peyote Stitch Video Tutorial
Bead Weaving Basics: Starting, Ending, and Adding Thread
Use pliers to gently open a 20mm tube for Hiilos interchangeable clasps. Add one end of the peyote band by sliding the last rows of beads into the tube. Close the ends of the tube and squeeze the tube shut. Repeat on the other end of the band with another tube.
How to Finish a Peyote Band for a Hiilos Interchangeable Clasp Video
Slide the desired tubes into one side of the Hiilos 45mm clasp and then slide the tubes on the other ends of the bracelets into the other side of the clasp in reverse order. You can also try different Hiilos clasps sizes for smaller bracelet stacks.
Nice choice! All or most of the products needed for this project are shown below with quantities. Sometimes we sell out of components and aren’t able to order more from the manufacturer (we know, it is very disappointing to us, too). Use the opportunity to mix up the design and make it yours by substituting similar products or altering the entire color scheme—it’s up to you!
Use Hiilos clasps to create interchangeable bracelet stacks with fun beads like TOHO Aiko seed beads, Miyuki Tila Beads, Czech glass, and more.
Cut a length of jewelry wire approximately 12 inches long. Slide a crimp tube onto the end of the wire, followed by a seed bead from the Satin Sunset Aiko Seed Bead Mix. Bring the wire back through the crimp tube and crimp in place. Add a random pattern of seed beads to the wire until the strand is the desired length, keeping in mind the Hiilos clasp will add some length. Then, add a crimp tube and a seed bead to the end of the wire. Bring the wire back through the crimp tube and crimp in place.
Cut a length of TOHO Amiet beading thread approximately 24 inches long. Make a double knot at one end. Then, add a Czech glass bead from the Artbeads 4mm Royal Castle Designer Czech Glass Blend to the thread. Make a knot at the other end of the bead. Then, add a Czech glass 5x3mm seafoam green and white silk mix with purple bronze finish faceted rondelle bead. Knot at the end of the bead. Repeat adding a Royal Castle bead, knotting, adding a rondelle, and knotting until the strand is the desired length. Make a double knot at the end of the strand.
Pearl Knotting Text Tutorial
Pearl Knotting with a Clasp Text Tutorial
Knotter Tool Video Tutorial
Use pliers to gently open an 11mm tube for Hiilos interchangeable clasps. Add the knotted strand to the tube by sliding the double knot at the end of the strand into the tube. Then, add the seed bead strand by adding the seed bead at a crimped end of the strand into the tube. Close the ends of the tube and squeeze the tube shut. Repeat on the other ends of the strands with another tube.
How to Finish a Beaded Strand for a Hiilos Interchangeable Clasp Video
Use pliers to gently open an 11mm tube. Add the Half Tila strand into the tube. Close the ends of the tube and squeeze the tube shut. Repeat on the other end of the strand with another tube.
Cut a length of jewelry wire approximately 12 inches long. Slide a crimp tube onto the end of the wire, followed by a seed bead. Bring the wire back through the crimp tube and crimp in place. Add a random pattern of Royal Castle beads to the strand until it is the desired length. Then, add a crimp tube and seed bead to the strand. Bring the wire back through the crimp tube and crimp in place.
Cut a length of jewelry wire approximately 12 inches long. Slide a crimp tube onto the end of the wire, followed by a seed bead. Bring the wire back through the crimp tube and crimp in place. Add a Royal Castle bead, a Czech rondelle, a Czech glass Aster coin bead, a rondelle bead, a Royal Castle bead, and a Czech glass hibiscus bead to the strand. Repeat this pattern until the strand is the desired length. Add a crimp tube to the wire followed by a seed bead. Bring the wire back through the crimp tube and crimp in place.
Use pliers to gently open an 11mm tube for Hiilos interchangeable clasps. Add the Royal Castle strand to the tube by sliding the seed bead at the end of the strand into the tube. Then, add the Flower bead strand by adding the seed bead at a crimped end of the strand into the tube. Close the ends of the tube and squeeze the tube shut. Repeat on the other ends of the strands with another tube.
Cut a length of brass chain to the desired length for a bracelet strand. Add a jump ring to one end of the chain. With the jump ring still open, add a seed bead. Close the jump ring. Repeat on the other end of the chain.
Cut two strands of jewelry wire each 12 inches long. Slide a crimp tube onto the end of each wire, followed by a seed bead for each. Bring each wire through its respective crimp tube and crimp each in place. Add a Miyuki opaque luster peach Half Tila Bead to both wires, followed by a Miyuki metallic bronze Tila Bead, a peach Half Tila, a matte metallic Half Tila, a Miyuki light caramel pearl Tila bead, and a matte metallic Half Tila Bead. Repeat this pattern until the strand is the desired length. Then, add a crimp tube and a seed bead to each end of wire. Bring each wire back through its crimp tube and crimp in place.
Use pliers to gently open an 11mm tube for Hiilos interchangeable clasps. Add the Tila strand to the tube by sliding the seed beads at the end of the strands into the tube. Then, add the chain strand by adding the seed bead on the jump ring into the tube. Close the ends of the tube and squeeze the tube shut. Repeat on the other ends of the strands with another tube.
Working with a comfortable length of thread and a needle, add 14 seed beads to the thread. These will be your first two rows of your even-count peyote stitch band. Continue the stitch to the desired length using random colors of seed beads. Then finish and trim your thread.
Even Count Peyote Stitch PDF Diagram
Even Count Peyote Stitch Text Tutorial
Even Count Peyote Stitch Video Tutorial
Bead Weaving Basics: Starting, Ending, and Adding Thread
Use pliers to gently open a 20mm tube for Hiilos interchangeable clasps. Add one end of the peyote band by sliding the last rows of beads into the tube. Close the ends of the tube and squeeze the tube shut. Repeat on the other end of the band with another tube.
How to Finish a Peyote Band for a Hiilos Interchangeable Clasp Video
Slide the desired tubes into one side of the Hiilos 45mm clasp and then slide the tubes on the other ends of the bracelets into the other side of the clasp in reverse order. You can also try different Hiilos clasps sizes for smaller bracelet stacks.