Marilyn

Bracelet

Attach the silver-plated medium lobster clasp to one Alacarte 24mm antique silver-plated brass crimp end tube using a sterling silver 5.95mm open jump ring.

Link eight jump rings together in a chain. Attach the last one to the other crimp end tube. Slide a 6mm pave ball bead in Crystal onto a sterling silver 24 gauge 1.25-inch ball-end head pin. Attach it to the end of the jump ring chain by creating a wrapped loop.

At this point, you want to measure how much length your clasp ends take up in order to determine how long to cut your cup chain. Hook the clasp to the center link of the jump ring chain you created in the last step. Then, hold up the clasp ends to the EZ Bracelet Mini. Measure the distance remaining to determine how long to cut the cup chain for your ideal size. We used 40 crystals per strand of cup chain for our bracelet. It is sized to a size 7 wrist. There will be some cup chain left over, so if you want to make your strands longer than ours, you can.

Cut nine strands of the rhodium-plated cup chain with PP18 Crystals to the length needed to make your bracelet the right size. These will all be equal in length. Slide the crystal on the end of each strand into one of the end tubes. Then, fold down the ends of the tubes to secure the cup chain in place. Slide the other ends of the chain into the other end tube. Fold down the ends of this tube and your bracelet is complete. 

Earrings

Cut the following lengths of cup chain:

• Two lengths of seven crystals
• Four lengths of nine crystals
• Two lengths of ten crystals
• One length of 12 crystals

Slide the lengths into a crimp end tube in the following order:

• 1 seven-crystal length of chain
• 2 nine-crystal lengths of chain
• 1 ten-crystal length of chain
• 1 twelve-crystal length of chain
• 1 ten-crystal length of chain
• 2 nine-crystal lengths of chain
• 1 seven-crystal length of chain

Fold down the ends of the tube to secure the cup chain in place. Add the sterling silver 4mm clear CZ fancy bezel earwire with ring to the loop on the end tube. Repeat steps five and six to make the other earring.

List of Components:
Bracelet:
27004 Rhodium-Plated Cup Chain with 1028 PP18 Crystal (27004-RCRY18PP, qty 5)
Alacarte 24mm Antique Silver-Plated Brass Crimp End Tube (FIND-1777, qty 2)
Silver-Plated Medium Lobster Clasp (CLASP11-SP, qty 1)
86001 6mm Pav Ball Bead Crystal (86001-CRY6, qty 1)
Sterling Silver Open Jump Ring - 0.035 x .235 inches (0.90 x 5.95mm) (SS-OJR35-D, qty 9)
Sterling Silver 1.25-inch Ball-end Head Pin, 24 gauge (SS-BHP07, qty 1)
Earrings:
27004 Rhodium-Plated Cup Chain with 1028 PP18 Crystal (27004-RCRY18PP, qty 2)
Alacarte 24mm Antique Silver-Plated Brass Crimp End Tube (FIND-1777, qty 2)
Sterling Silver 4mm Clear CZ Fancy Bezel Earwire with Ring (EAR-0130, qty 2)