The Russian artist bead in this design has wonderful floral details. I chose to continue with that theme for the rest of the necklace using lampwork beads.
With vibrant garden colors apparent in all aspects of the piece, this Primrose Maiden necklace makes a wonderful statement for your evening outfits. The stunning design is simple to make yet creates an elaborate look.
Cut two 10-inch long pieces of jewelry wire, one 2.5-inch piece of satin Hamilton gold-plated round links on round cable chain and one 0.5-inch piece of round links on round cable chain and set aside.
Thread the 9mm teardrop in Indicolite and one 4mm faceted round in Fern Green onto the gold-filled 020 1.5-inch head pin and finish with a simple loop. Attach to the eye of the gold-filled 1.5-inch eye pin and finish with a simple loop. Attach to the eye of the gold-filled 1.5-inch eye pin, and then thread the eye pin with one 4mm round pearl in Bordeaux, the largest of the Grace Lampwork tropical flower mix graduated roundel bead and one Fern Green 4mm faceted round. Finish the eye pin by attaching it to one end of the 0.5-inch long cable chain and finish with a simple loop.
Thread the 25x36mm Primrose by Mucha on black onyx rectangle bead onto the sterling silver 2-inch, 22 gauge eye pin. Attach the eye portion to one 6mm gold-plated jump ring and connect the jump ring to the open end of the chain from Step two. Finish the open end of the sterling silver eye pin with a simple loop and attach it to a second 6mm jump ring. Connect this jump ring to the center of the 2/5-inch piece of cable chain.
Attach one jewelry wire strand to the left side of the 2.5-inch cable chain using a 14K/20 gold-filled 2x2mm crimp tube. Simply thread the wire through one round cable link on the chain and secure with the crimp tube.
Thread one 4mm Fern Green faceted round, one 6mm round pearl in Bordeaux and two lampwork beads onto the wire. Then, thread the following pattern:
one 6mm Bordeaux round pearl
one 4mm Fern Green faceted round
five 6mm faceted rounds in Indicolite
Repeat this pattern three more times, then attach the bar portion of the JBB brass falling leaf toggle clasp to the end of the wire using a second crimp tube.
Repeat steps four and five to the right side of the focal, substituting the loop portion of the clasp in Step five.
List of Components: 25x36mm Primrose By Mucha on Black Onyx Rectangle Bead (BEAD-0253, qty 1) Satin Hamilton Gold-Plated Round Links on Round Cable Chain (BTF-0087, qty 1) 9mm Teardrop Indicolite (5500-IND9X6, qty 1) Grace Lampwork Tropical Flower Mix Graduated Roundel Bead (5 pcs) Strand (BS-0074, qty 1) JBB Brass Falling Leaf Toggle Clasp (BB-TOG03, qty 1) 6mm Round Pearl Bordeaux (5810-BXP6, qty 12) 4mm Round Pearl Bordeaux (5810-BXP4, qty 1) 4mm Faceted Round Fern Green (5000-FGN4, qty 21) 5mm Satin Hamilton Gold-Plated Open Jump Ring (FIND-0447, qty 2) 2-inch Eye Pin, 22 Gauge (Sterling Silver) (SS-EP22, qty 1) Gold-Filled 1.5-Inch Eye Pin (GF-EP150-020, qty 1) Gold-Plated Jump Ring 6mm (JR-G06, qty 2) Gold-Filled 020 1.5-Inch Head Pin (GF-HP150-020, qty 1) 14K/20 Gold-Filled 2x2mm Crimp Tube (GF-CRM2, qty 4) 4mm Bicone Fern Green (5328-FGN4, qty 1) 6mm Faceted Round Indicolite (5000-IND6, qty 40)
Add all available items to your cart at once or edit the quantities below.
Any items with quantities lower than stated minimums will default to the minimum in your cart.
Nice choice! All or most of the products needed for this project are shown
below with quantities. Sometimes we sell out of components and aren’t able to order more from
the manufacturer (we know, it is very disappointing to us, too). Use the opportunity to mix up
the design and make it yours by substituting similar products or altering the entire color
scheme—it’s up to you!
Please wait while we add the products to your cart.
Primrose Maiden Necklace Tutorial
Hand-Painted Maiden Bead with Lampwork Glass Necklace
designed byCynthia Kimura
Skill LevelBeginner
Time1-3 Hours
Approximate Size21 Inches
The Russian artist bead in this design has wonderful floral details. I chose to continue with that theme for the rest of the necklace using lampwork beads.
With vibrant garden colors apparent in all aspects of the piece, this Primrose Maiden necklace makes a wonderful statement for your evening outfits. The stunning design is simple to make yet creates an elaborate look.
25x36mm Primrose By Mucha on Black Agate Rectangle Bead
Code BEAD-0253
$54.24
$79.37
×1
Gold-Filled 020 1.5-Inch Head Pin - Min Qty 2
Code GF-HP150-020
$0.61
×1
Gold-Filled 1.5-Inch Eye Pin - Min Qty 2
Code GF-EP150-020
$0.61
×1
Side Cutters - Semi Flush
Code TOOL-131
$10.69
×1
Round Nose Pliers
Code TOOL-108
$6.99
×1
PRESTIGE 5810 6mm Round Crystal Pearl Bordeaux - Min Qty 10
Code 5810-BXP6
$0.12
$0.19
×12
Beadalon Gold-Plated Jump Ring 6mm - Min Qty 20
Code JR-G06
$0.06
×2
5mm Satin Hamilton Gold-Plated Open Jump Ring - Min Qty 20
Code FIND-0447
$0.05
×2
Nipper Tool
Code TOOL-101
$7.89
×1
Chain Nose Pliers
Code TOOL-106
$6.99
×1
Step-by-Step Instructions
Cut two 10-inch long pieces of jewelry wire, one 2.5-inch piece of satin Hamilton gold-plated round links on round cable chain and one 0.5-inch piece of round links on round cable chain and set aside.
Thread the 9mm teardrop in Indicolite and one 4mm faceted round in Fern Green onto the gold-filled 020 1.5-inch head pin and finish with a simple loop. Attach to the eye of the gold-filled 1.5-inch eye pin and finish with a simple loop. Attach to the eye of the gold-filled 1.5-inch eye pin, and then thread the eye pin with one 4mm round pearl in Bordeaux, the largest of the Grace Lampwork tropical flower mix graduated roundel bead and one Fern Green 4mm faceted round. Finish the eye pin by attaching it to one end of the 0.5-inch long cable chain and finish with a simple loop.
Thread the 25x36mm Primrose by Mucha on black onyx rectangle bead onto the sterling silver 2-inch, 22 gauge eye pin. Attach the eye portion to one 6mm gold-plated jump ring and connect the jump ring to the open end of the chain from Step two. Finish the open end of the sterling silver eye pin with a simple loop and attach it to a second 6mm jump ring. Connect this jump ring to the center of the 2/5-inch piece of cable chain.
Attach one jewelry wire strand to the left side of the 2.5-inch cable chain using a 14K/20 gold-filled 2x2mm crimp tube. Simply thread the wire through one round cable link on the chain and secure with the crimp tube.
Thread one 4mm Fern Green faceted round, one 6mm round pearl in Bordeaux and two lampwork beads onto the wire. Then, thread the following pattern:
one 6mm Bordeaux round pearl
one 4mm Fern Green faceted round
five 6mm faceted rounds in Indicolite
Repeat this pattern three more times, then attach the bar portion of the JBB brass falling leaf toggle clasp to the end of the wire using a second crimp tube.
Repeat steps four and five to the right side of the focal, substituting the loop portion of the clasp in Step five.
List of Components: 25x36mm Primrose By Mucha on Black Onyx Rectangle Bead (BEAD-0253, qty 1) Satin Hamilton Gold-Plated Round Links on Round Cable Chain (BTF-0087, qty 1) 9mm Teardrop Indicolite (5500-IND9X6, qty 1) Grace Lampwork Tropical Flower Mix Graduated Roundel Bead (5 pcs) Strand (BS-0074, qty 1) JBB Brass Falling Leaf Toggle Clasp (BB-TOG03, qty 1) 6mm Round Pearl Bordeaux (5810-BXP6, qty 12) 4mm Round Pearl Bordeaux (5810-BXP4, qty 1) 4mm Faceted Round Fern Green (5000-FGN4, qty 21) 5mm Satin Hamilton Gold-Plated Open Jump Ring (FIND-0447, qty 2) 2-inch Eye Pin, 22 Gauge (Sterling Silver) (SS-EP22, qty 1) Gold-Filled 1.5-Inch Eye Pin (GF-EP150-020, qty 1) Gold-Plated Jump Ring 6mm (JR-G06, qty 2) Gold-Filled 020 1.5-Inch Head Pin (GF-HP150-020, qty 1) 14K/20 Gold-Filled 2x2mm Crimp Tube (GF-CRM2, qty 4) 4mm Bicone Fern Green (5328-FGN4, qty 1) 6mm Faceted Round Indicolite (5000-IND6, qty 40)