I added purple and green crystals to this fall-themed charm bracelet for added color and to help capture a certain mood.
It's easy to believe in magic with this fantastical design. Sparkling dangles, along with hints of nocturnal woodland beauty, create hypnotizing wonder, all accented with shining glints of copper. The elegant mix of colors allows you to dress up any look just by slipping this bracelet on your wrist.
You are going to create dangles for your bracelet. The first dangles you make will be called Olivine dangles. Thread a 6mm faceted round in Olivine onto a 2-inch copper 22 gauge eye pin. Repeat this step thirteen times and set these Olivine dangles aside. You will finish them with wrapped loops later.
Next, create short Purple Velvet dangles. Thread a Nunn Design 6mm antique copper-plated pewter daisy bead cap onto a head pin, followed by a 8mm faceted round in Purple Velvet, another bead cap and a 6mm faceted round in Crystal Luminous Green. Repeat this step once more and set these short Purple Velvet dangles aside.
Now you are going to create long Purple Velvet and Copper dangles. Thread a 6mm round pearl in Copper onto a 2-inch copper 22 gauge eye pin, followed by a bead cap, a Purple Velvet round, another bead cap and another Copper pearl. Set aside. Thread a Crystal Luminous Green round onto a head pin and attach it to the end of the eye pin by creating a wrapped loop. Do not cut the wire after wrapping, keep wrapping on top of the beads to create a capped effect. Repeat this step four times and set these long Purple Velvet and Copper dangles aside.
You are now going to create a dragonfly dangle. Thread a Crystal Luminous Green round onto an eye pin and attach the Kabela Design antique brass small dragonfly charm to the end of the eye pin using a 4mm copper 20 gauge open jump ring. Set this dragonfly dangle aside.
Now you are going to create a scarab dangle. Thread a Crystal Luminous Green round onto an eye pin and attach the Kabela Design antique brass lil scarab link to the end of the eye pin using a 6mm copper 18 gauge open jump ring. Set this scarab dangle aside.
Next you are going to construct a moon dangle. Thread a Crystal Luminous Green round onto an eye pin and attach the Kabela Design small crescent moon charm to the end of the eye pin using a 6mm open jump ring. Set this moon dangle aside for now.
Finally, you will create your center dangle. Thread two beads caps stacked onto each other so all the petals show onto a head pin, followed by a Purple Velvet round, another bead cap and a Crystal Luminous Green round. Set this center dangle aside for now.
Cut a length of antique copper-plated textured double oval link chain approximately seven inches or 20 links long. Add one half of the TierraCast 5/8-inch antique copper-plated Anna's toggle clasp to one end of the chain and the other half to the other end.
Use a Chain Stä to hold your bracelet up as you add dangles. You can start from the center and work out toward the left and then the right. Add the center dangle to the approximate center link of your bracelet by creating a wrapped loop at the top of the head pin. Again, when finishing the wrapped loops, just keep wrapping over the bead instead of cutting the wire. You will do this for all of the dangles. Because this is double oval link chain, there should be another open link in the center. Attach an Olivine dangle to this link by creating a wrapped loop.
Add dangles in a random order, working from the center dangle toward the left side of the bracelet. We added an Olivine dangle, followed by the scarab dangle, a long Purple Velvet and Copper dangle, a short Purple Velvet dangle, two Olivine dangles and a long Purple Velvet and Copper dangle, the Moon dangle, a TierraCast antique copper ivy leaf charm attached to the chain using a 6mm open jump ring, a long Purple Velvet and Copper dangle and three Olivine dangles attached to one link using an 8mm 18 gauge open jump ring.
Now, work from the center dangle toward the right side of the bracelet, placing dangles in a random order. We added three Olivine dangles to an 8mm open jump ring and attached it to a link in the chain, followed by a long Purple Velvet and Copper dangle, an Olivine dangle, an ivy leaf charm attached to the chain using a 6mm open jump ring, the dragonfly dangle, another Olivine dangle, a short Purple Velvet dangle, a long Purple Velvet and Copper dangle and three Olivine dangles and an ivy leaf charm attached to one link using an 8mm open jump ring. Your Byzantine Royalty bracelet is now complete
List of Components: 5000 8mm Faceted Round Purple Velvet (5000-PURV8, qty 8) Nunn Design 6mm Antique Copper-Plated Pewter Daisy Bead Cap (FIND-1202, qty 16) 5810 6mm Round Pearl Copper (5810-COP6, qty 10) 5000 6mm Faceted Round Olivine (5000-OL6, qty 14) 5000 6mm Faceted Round Crystal Luminous Green (5000-CLU6, qty 11) Kabela Design Antique Brass Lil Scarab Link (FIND-0045, qty 1) TierraCast Antique Copper Ivy Leaf Charm (CA-2010, qty 3) Kabela Design Antique Brass Small Crescent Moon Charm (BBA-CH071, qty 1) Kabela Design Antique Brass Small Dragonfly Charm (BBA-CH073, qty 1) Antique Copper-Plated Textured Double Oval Link Chain (BTF-0103, qty 1) TierraCast 5/8-Inch Antique Copper-Plated Pewter Anna's Toggle and Clasp (CA-6157, qty 1) 2-Inch Copper 22 Gauge Head Pin (FIND-1033, qty 22) 2-Inch Copper 22 Gauge Eye Pin (FIND-1041, qty 8) 8mm Copper 18 Gauge Open Jump Ring (FIND-1052, qty 3) 6mm Copper 18 Gauge Open Jump Ring (FIND-1050, qty 4) 4mm Copper 20 Gauge Open Jump Ring (FIND-1042, qty 1)
Add all available items to your cart at once or edit the quantities below.
Any items with quantities lower than stated minimums will default to the minimum in your cart.
Nice choice! All or most of the products needed for this project are shown
below with quantities. Sometimes we sell out of components and aren’t able to order more from
the manufacturer (we know, it is very disappointing to us, too). Use the opportunity to mix up
the design and make it yours by substituting similar products or altering the entire color
scheme—it’s up to you!
Please wait while we add the products to your cart.
Byzantine Royalty
Fall Crystal Copper Charm Bracelet
designed byCynthia Kimura
Skill LevelBeginner
TechniqueCharm Bracelets & Necklaces
Time1-3 Hours
Approximate Size7 Inches
I added purple and green crystals to this fall-themed charm bracelet for added color and to help capture a certain mood.
It's easy to believe in magic with this fantastical design. Sparkling dangles, along with hints of nocturnal woodland beauty, create hypnotizing wonder, all accented with shining glints of copper. The elegant mix of colors allows you to dress up any look just by slipping this bracelet on your wrist.
Supplies
6mm Copper 18 Gauge Open Jump Ring - Min Qty 20
Code FIND-1050
$0.04
$0.05
×4
4mm Copper 20 Gauge Open Jump Ring - Min Qty 45
Code FIND-1042
$0.02
$0.03
×1
2-Inch Copper 22 Gauge Head Pin - Min Qty 15
Code FIND-1033
$0.08
$0.09
×22
German Side Cutter
Code TOOL-503
$35.79
×1
German Chain Nose Pliers
Code TOOL-500
$28.79
×1
German Round Nose Pliers
Code TOOL-502
$28.79
×1
8mm Copper 18 Gauge Open Jump Ring - Min Qty 15
Code FIND-1052
$0.06
$0.07
×3
Nunn Design 6mm Antique Copper-Plated Pewter Daisy Bead Cap
Code FIND-1202
$0.75
$1.19
×16
Step-by-Step Instructions
You are going to create dangles for your bracelet. The first dangles you make will be called Olivine dangles. Thread a 6mm faceted round in Olivine onto a 2-inch copper 22 gauge eye pin. Repeat this step thirteen times and set these Olivine dangles aside. You will finish them with wrapped loops later.
Next, create short Purple Velvet dangles. Thread a Nunn Design 6mm antique copper-plated pewter daisy bead cap onto a head pin, followed by a 8mm faceted round in Purple Velvet, another bead cap and a 6mm faceted round in Crystal Luminous Green. Repeat this step once more and set these short Purple Velvet dangles aside.
Now you are going to create long Purple Velvet and Copper dangles. Thread a 6mm round pearl in Copper onto a 2-inch copper 22 gauge eye pin, followed by a bead cap, a Purple Velvet round, another bead cap and another Copper pearl. Set aside. Thread a Crystal Luminous Green round onto a head pin and attach it to the end of the eye pin by creating a wrapped loop. Do not cut the wire after wrapping, keep wrapping on top of the beads to create a capped effect. Repeat this step four times and set these long Purple Velvet and Copper dangles aside.
You are now going to create a dragonfly dangle. Thread a Crystal Luminous Green round onto an eye pin and attach the Kabela Design antique brass small dragonfly charm to the end of the eye pin using a 4mm copper 20 gauge open jump ring. Set this dragonfly dangle aside.
Now you are going to create a scarab dangle. Thread a Crystal Luminous Green round onto an eye pin and attach the Kabela Design antique brass lil scarab link to the end of the eye pin using a 6mm copper 18 gauge open jump ring. Set this scarab dangle aside.
Next you are going to construct a moon dangle. Thread a Crystal Luminous Green round onto an eye pin and attach the Kabela Design small crescent moon charm to the end of the eye pin using a 6mm open jump ring. Set this moon dangle aside for now.
Finally, you will create your center dangle. Thread two beads caps stacked onto each other so all the petals show onto a head pin, followed by a Purple Velvet round, another bead cap and a Crystal Luminous Green round. Set this center dangle aside for now.
Cut a length of antique copper-plated textured double oval link chain approximately seven inches or 20 links long. Add one half of the TierraCast 5/8-inch antique copper-plated Anna's toggle clasp to one end of the chain and the other half to the other end.
Use a Chain Stä to hold your bracelet up as you add dangles. You can start from the center and work out toward the left and then the right. Add the center dangle to the approximate center link of your bracelet by creating a wrapped loop at the top of the head pin. Again, when finishing the wrapped loops, just keep wrapping over the bead instead of cutting the wire. You will do this for all of the dangles. Because this is double oval link chain, there should be another open link in the center. Attach an Olivine dangle to this link by creating a wrapped loop.
Add dangles in a random order, working from the center dangle toward the left side of the bracelet. We added an Olivine dangle, followed by the scarab dangle, a long Purple Velvet and Copper dangle, a short Purple Velvet dangle, two Olivine dangles and a long Purple Velvet and Copper dangle, the Moon dangle, a TierraCast antique copper ivy leaf charm attached to the chain using a 6mm open jump ring, a long Purple Velvet and Copper dangle and three Olivine dangles attached to one link using an 8mm 18 gauge open jump ring.
Now, work from the center dangle toward the right side of the bracelet, placing dangles in a random order. We added three Olivine dangles to an 8mm open jump ring and attached it to a link in the chain, followed by a long Purple Velvet and Copper dangle, an Olivine dangle, an ivy leaf charm attached to the chain using a 6mm open jump ring, the dragonfly dangle, another Olivine dangle, a short Purple Velvet dangle, a long Purple Velvet and Copper dangle and three Olivine dangles and an ivy leaf charm attached to one link using an 8mm open jump ring. Your Byzantine Royalty bracelet is now complete
List of Components: 5000 8mm Faceted Round Purple Velvet (5000-PURV8, qty 8) Nunn Design 6mm Antique Copper-Plated Pewter Daisy Bead Cap (FIND-1202, qty 16) 5810 6mm Round Pearl Copper (5810-COP6, qty 10) 5000 6mm Faceted Round Olivine (5000-OL6, qty 14) 5000 6mm Faceted Round Crystal Luminous Green (5000-CLU6, qty 11) Kabela Design Antique Brass Lil Scarab Link (FIND-0045, qty 1) TierraCast Antique Copper Ivy Leaf Charm (CA-2010, qty 3) Kabela Design Antique Brass Small Crescent Moon Charm (BBA-CH071, qty 1) Kabela Design Antique Brass Small Dragonfly Charm (BBA-CH073, qty 1) Antique Copper-Plated Textured Double Oval Link Chain (BTF-0103, qty 1) TierraCast 5/8-Inch Antique Copper-Plated Pewter Anna's Toggle and Clasp (CA-6157, qty 1) 2-Inch Copper 22 Gauge Head Pin (FIND-1033, qty 22) 2-Inch Copper 22 Gauge Eye Pin (FIND-1041, qty 8) 8mm Copper 18 Gauge Open Jump Ring (FIND-1052, qty 3) 6mm Copper 18 Gauge Open Jump Ring (FIND-1050, qty 4) 4mm Copper 20 Gauge Open Jump Ring (FIND-1042, qty 1)