This design actually features two beaded necklaces that can be layered together or worn separately.
Simple layers filled with jewel colors will warm up winter looks and even add character to summertime style. Wear these two necklaces together to inspire your style with bohemian elegance. With a hint of Eastern European style, you can't go wrong with these pieces layered into your looks. Pair with rich leather, green velvets and embroidered details for a "romantic traveler" look.
Cut a length of jewelry wire approximately 44 inches long.
Leave a tail approximately two inches long on the jewelry wire and string on the following pattern:
Four fire-polished 3mm beads in jet
One 6x9mm cranberry red mix roundel bead
Four 3mm fire-polished beads in jet
One fire-polished 6mm bead in siam
Four 3mm fire-polished beads in jet
One fire-polished 10mm bead in siam
Four 3mm fire-polished beads in jet
One 6mm siam fire-polished bead
Four 3mm fire-polished beads in jet
One fire-polished 4mm bead in jet
One fire-polished 8mm bead in jet
One 4mm jet fire-polished bead
Four 3mm fire-polished beads in jet
One glass flat hexagon 14mm bead in hematite
Four 3mm fire-polished beads in jet
One Czech glass 6mm garnet patina finish faceted roundel bead
Four 3mm fire-polished beads in jet
One fire-polished 10mm bead in jet
,
Repeat this pattern, substituting the cranberry red mix roundel bead with a garnet patina finish roundel bead. Repeat the pattern again, this time substituting the hexagon hematite bead with a glass flat hexagon 14mm bead in garnet. Repeat again, switching the cranberry red mix roundel bead with a garnet patina finish roundel bead. Repeat the pattern once more, switching out the hexagon hematite bead for a garnet hexagon bead.
Finish the strand with this pattern:
Four 3mm fire-polished beads in jet
One cranberry red mix roundel bead
Four 3mm fire-polished beads in jet
One 6mm siam fire-polished bead
Four 3mm fire-polished beads in jet
One 10mm Siam fire-polished bead
Four 3mm fire-polished beads in jet
One 6mm Siam fire-polished bead
Four 3mm fire-polished beads in jet
,
You should have a tail left on this end of the jewelry strand, too. String on a sterling silver 2x2mm crimp tube, followed by an 8mm jet fire-polished bead, four 3mm fire-polished beads in jet, one 10mm jet fire-polished bead, four 3mm fire-polished beads in jet and another 8mm jet fire-polished bead.
Take the tail of the jewelry wire from the other end of the necklace and string on another crimp tube on this end. Thread the rest of the tail through the beads after the crimp tube on the other end of the strand. Thread this tail through the crimp tube, too. Make sure both ends of the strand go through both crimp tubes. Crimp both the crimp tubes closed to secure your strand. Cover the crimp tubes with sterling silver 3mm sandblasted crimp covers.
Cut a length of jewelry wire approximately 62 inches long.
This necklace features a colorful, random pattern. There will be nine 3mm jet fire-polished beads in between each of the larger, colorful beads. Create a random pattern to suit your taste. Our necklace features one 8mm ruby deep cut nuggets, two 8mm dark amethyst deep cut nuggets, two 8mm olivine deep cut nuggets, two 8mm fuchsia deep cut nuggets, one 8mm Hawaiian colors deep cut nugget, one 10mm emerald deep cut nugget, one 10mm olivine deep cut nugget, two 10mm green tiger eye deep cut nuggets, three 10mm 2-tone blue deep cut nuggets, three glass flat hexagon 14mm beads in Madeira topaz, one garnet hexagon bead, two glass flat hexagon 14mm beads in cobalt, three Czech glass 15x8mm hexagon bead in crystal with Picasso, two cranberry red mix roundel beads, two garnet patina finish roundel beads, five Czech glass opaque amber Picasso finish faceted roundel beads, two 8mm jet fire-polished beads and three 10mm jet fire-polished beads.
You should have a three-inch tail of jewelry wire left on either end of the strand. On one end, string on a crimp tube, followed by nine 3mm jet fire-polished beads, a ruby deep cut nuggets, nine 3mm jet fire-polished beads and one 8mm jet fire-polished bead. String a crimp tube onto the other tail and thread it through the beads after the crimp tube on the other end of the strand. Make sure both ends of the strands go through both crimp tubes. Crimp both crimp tubes closed and cover with crimp covers.
Add all available items to your cart at once or edit the quantities below.
Any items with quantities lower than stated minimums will default to the minimum in your cart.
Nice choice! All or most of the products needed for this project are shown
below with quantities. Sometimes we sell out of components and aren’t able to order more from
the manufacturer (we know, it is very disappointing to us, too). Use the opportunity to mix up
the design and make it yours by substituting similar products or altering the entire color
scheme—it’s up to you!
Please wait while we add the products to your cart.
Bohemia Necklace Tutorial
Jewel-Toned Layered Necklaces
designed byArtbeads
Skill LevelBeginner
TechniqueSimple Stringing
Time1-3 Hours
Approximate Size40 Inches and 60 Inches
This design actually features two beaded necklaces that can be layered together or worn separately.
Simple layers filled with jewel colors will warm up winter looks and even add character to summertime style. Wear these two necklaces together to inspire your style with bohemian elegance. With a hint of Eastern European style, you can't go wrong with these pieces layered into your looks. Pair with rich leather, green velvets and embroidered details for a "romantic traveler" look.
Sterling Silver 2 x 2mm Crimp Tube Bead - Min Qty 10
Code SS-CRM2
$0.14
×4
Czech Fire-Polish Bead 4mm Jet (50pc strand) by Starman
Code FPS-JET4
$1.69
×1
Czech Fire-Polish Glass Beads 6mm Round Ruby Siam Red
Code FPS-SIA6
$1.89
×1
Czech Fire-Polish Glass Beads 8mm Round Jet Black
Code FPS-JET8
$2.79
×1
Bead Stopper - 6-Piece Pack
Code BEADSTPR
$5.59
×1
Micro Crimper
Code TOOL-102
$13.09
×1
Side Cutters - Semi Flush
Code TOOL-131
$10.69
×1
Step-by-Step Instructions
Red Necklace
Cut a length of jewelry wire approximately 44 inches long.
Leave a tail approximately two inches long on the jewelry wire and string on the following pattern:
Four fire-polished 3mm beads in jet
One 6x9mm cranberry red mix roundel bead
Four 3mm fire-polished beads in jet
One fire-polished 6mm bead in siam
Four 3mm fire-polished beads in jet
One fire-polished 10mm bead in siam
Four 3mm fire-polished beads in jet
One 6mm siam fire-polished bead
Four 3mm fire-polished beads in jet
One fire-polished 4mm bead in jet
One fire-polished 8mm bead in jet
One 4mm jet fire-polished bead
Four 3mm fire-polished beads in jet
One glass flat hexagon 14mm bead in hematite
Four 3mm fire-polished beads in jet
One Czech glass 6mm garnet patina finish faceted roundel bead
Four 3mm fire-polished beads in jet
One fire-polished 10mm bead in jet
,
Repeat this pattern, substituting the cranberry red mix roundel bead with a garnet patina finish roundel bead. Repeat the pattern again, this time substituting the hexagon hematite bead with a glass flat hexagon 14mm bead in garnet. Repeat again, switching the cranberry red mix roundel bead with a garnet patina finish roundel bead. Repeat the pattern once more, switching out the hexagon hematite bead for a garnet hexagon bead.
Finish the strand with this pattern:
Four 3mm fire-polished beads in jet
One cranberry red mix roundel bead
Four 3mm fire-polished beads in jet
One 6mm siam fire-polished bead
Four 3mm fire-polished beads in jet
One 10mm Siam fire-polished bead
Four 3mm fire-polished beads in jet
One 6mm Siam fire-polished bead
Four 3mm fire-polished beads in jet
,
You should have a tail left on this end of the jewelry strand, too. String on a sterling silver 2x2mm crimp tube, followed by an 8mm jet fire-polished bead, four 3mm fire-polished beads in jet, one 10mm jet fire-polished bead, four 3mm fire-polished beads in jet and another 8mm jet fire-polished bead.
Take the tail of the jewelry wire from the other end of the necklace and string on another crimp tube on this end. Thread the rest of the tail through the beads after the crimp tube on the other end of the strand. Thread this tail through the crimp tube, too. Make sure both ends of the strand go through both crimp tubes. Crimp both the crimp tubes closed to secure your strand. Cover the crimp tubes with sterling silver 3mm sandblasted crimp covers.
Cut a length of jewelry wire approximately 62 inches long.
This necklace features a colorful, random pattern. There will be nine 3mm jet fire-polished beads in between each of the larger, colorful beads. Create a random pattern to suit your taste. Our necklace features one 8mm ruby deep cut nuggets, two 8mm dark amethyst deep cut nuggets, two 8mm olivine deep cut nuggets, two 8mm fuchsia deep cut nuggets, one 8mm Hawaiian colors deep cut nugget, one 10mm emerald deep cut nugget, one 10mm olivine deep cut nugget, two 10mm green tiger eye deep cut nuggets, three 10mm 2-tone blue deep cut nuggets, three glass flat hexagon 14mm beads in Madeira topaz, one garnet hexagon bead, two glass flat hexagon 14mm beads in cobalt, three Czech glass 15x8mm hexagon bead in crystal with Picasso, two cranberry red mix roundel beads, two garnet patina finish roundel beads, five Czech glass opaque amber Picasso finish faceted roundel beads, two 8mm jet fire-polished beads and three 10mm jet fire-polished beads.
You should have a three-inch tail of jewelry wire left on either end of the strand. On one end, string on a crimp tube, followed by nine 3mm jet fire-polished beads, a ruby deep cut nuggets, nine 3mm jet fire-polished beads and one 8mm jet fire-polished bead. String a crimp tube onto the other tail and thread it through the beads after the crimp tube on the other end of the strand. Make sure both ends of the strands go through both crimp tubes. Crimp both crimp tubes closed and cover with crimp covers.