Aquamarine beads are such a lovely complement to the Grace Lampwork beads in this mix!
Our Facebook Live Design Challenge videos feature Artbeads Chief Jewelry Designer Cynthia making jewelry with beads picked out by Becky. This Live Challenge mix features Aquamarine beads. Watch Cynthia design with this mix on Facebook.
You can use all of the items from our mix, or pick your favorites. Try a whole new direction and shop all of our other jewelry-making components to create your own style inspired by some pieces from this mix . Remember, you can use the categories on the left of our search pages to shop by color, theme, and more.
Make something special with your chosen items. You can use these pieces for making necklaces, bracelets, earrings, or something else entirely. Try making a matching jewelry set. See what Cynthia made with these items while watching the video. You'll find basic instructions for each design she made in the steps below. If you need more inspiration, make sure to check out all of the fabulous free instructions in our Design Studio.
Necklace with TierraCast Flora Focal
Attach a 22mm metallic cap pear-shaped pendant in Aquamarine Light Chrome to the center of the TierraCast antique pewter reversible Flora crescent link using a sterling silver 6.85mm open jump ring.
Cut a length of jewelry wire approximately seven inches long. Slide a silver-plated 2x2mm crimp tube onto the end of the wire. Bring the end through the opening on one side of the Flora link and back through the crimp tube. Crimp in place. Repeat on the other side of the Floral link.
Add the following pattern to the wire: One TierraCast antique rhodium 4mm beaded bead cap, one 6mm faceted round in Aquamarine Shimmer, one 6mm round pearl in Crystal Iridescent Light Blue, one 6mm faceted round, one bead cap, and three 4mm XILION bicones in Tanzanite AB 2x. Repeat this pattern twice, leaving off the last set of Tanzanite bicones. Repeat the entire pattern on the other side of the necklace, too.
Slide a crimp tube onto the end of one wire, followed by the last link of a 6-inch length of antique silver-plated textured oval link chain. Bring the wire back through the crimp tube and crimp in place. Repeat on the other side of the necklace.
Attach each half of the JBB antique silver-plated pewter ivy leaf toggle clasp to each end of the necklace using a sterling silver 4.60mm open jump ring for each.
Cut a length of silver-plated 1+1 infinity link chain approximately 16 ½ inches long.
Slide a 3mm XILION bicone in Capri Blue AB onto a 2-inch 22 gauge sterling silver eye pin, followed by a 8mm butterfly in Aquamarine and another Capri Blue bicone. Attach this dangle to the center oval link of the chain by making a wrapped loop. Attach a 10mm classic cut pendant in Crystal Bermuda Blue to the bottom of the eye pin using a 6.85mm jump ring.
Add a Capri Blue bicone, a butterfly, and a Capri Blue bicone to a 2-inch 24 gauge sterling silver head pin. Attach this dangle to the second oval link over from the center by making a wrapped loop. Repeat on the other side of the focal.
Add a Capri Blue bicone, a butterfly, and a Capri Blue bicone to a head pin. Attach this dangle to the fourth oval link over from the center by making a wrapped loop. Repeat on the other side of the focal.
Attach a JBB sterling silver 16mm spiral toggle clasp to each end of the necklace using a 4.60mm jump ring for each end.
Cut a length of jewelry wire approximately six inches long. Slide a crimp tube onto one end and slide on a 4.60mm jump ring connected to the last link of a 6-inch length of sterling silver dapped cable chain. Bring the wire back through the crimp tube and crimp in place.
Add the following pattern to the wire: Three Capri Blue bicones, one 4mm XILION bicone in Light Sapphire, one Indian silver 5mm daisy spacer, one 6mm faceted round, one daisy spacer, one 4mm Light Sapphire bicone, three Capri Blue bicones.
Add a Light Sapphire bicone to a Bali silver head pin with large granulations, followed by a Grace Lampwork water lily garden pillow bead and another Light Sapphire bicone. Make a wrapped loop at the top of the beads. Add this focal to your wire and make a mirror image of the bead pattern on the other side of the focal.
Add a crimp tube to the end of the wire, followed by a jump ring attached to a 6-inch length of chain. Bring the wire back through the crimp tube and crimp in place.
Add a toggle clasp to the ends of the necklace using a jump ring for each end.
Add a Light Sapphire bicone to a Bali silver head pin, followed by a water lily bead, and a Light Sapphire bicone. Make a wrapped loop at the top of the beads.
Attach an eye pin to the top of the wrapped loop. Add a Capri Blue bicone to the eye pin, followed by a daisy spacer, a 6mm faceted round, a daisy spacer, and a Capri Blue bicone. Make a wrapped loop at the top of the beads.
Open the loop of a 925/10 silver-filled 14.5mm 22 gauge earwire and attach it to the top of your earring. Close the loop.
Add a Capri Blue bicone to an eye pin, followed by a butterfly bead, a beaded bead cap, a Tanzanite bicone, a bead cap, and a Capri Blue bicone. Make a wrapped loop at the top of the beads.
Add a classic cut pendant to the bottom of your link using a 4.60mm jump ring.
Open the loop of an earwire and add it to the top of your earring. Close the loop.
Add all available items to your cart at once or edit the quantities below.
Any items with quantities lower than stated minimums will default to the minimum in your cart.
Nice choice! All or most of the products needed for this project are shown
below with quantities. Sometimes we sell out of components and aren’t able to order more from
the manufacturer (we know, it is very disappointing to us, too). Use the opportunity to mix up
the design and make it yours by substituting similar products or altering the entire color
scheme—it’s up to you!
Please wait while we add the products to your cart.
Aquamarine Pond Live Challenge Mix
Color Palette Featuring Aquamarine Crystals, Grace Lampwork Beads, and More
designed byBecky Dahl
Aquamarine beads are such a lovely complement to the Grace Lampwork beads in this mix!
Our Facebook Live Design Challenge videos feature Artbeads Chief Jewelry Designer Cynthia making jewelry with beads picked out by Becky. This Live Challenge mix features Aquamarine beads. Watch Cynthia design with this mix on Facebook.
Supplies
Bead Crimper Tool
Code TOOL-100
$13.09
×1
Tronex Taper Flush Cutters Relieved with Ergonomic Handle
PRESTIGE 5810 6mm Round Pearl Crystal Iridescent Light Blue - Min Qty 5
Code 5810-CILB6
$0.23
×6
PRESTIGE 6565 22mm Metallic Cap Pear-Shaped Pendant Aquamarine Light Chrome
Code 6565-AQUALC22
$3.64
$4.54
×1
TOHO Demi Round Bead 6/0 Matte-Color Iris Teal 2.5-Inch Tube
Code TBDMR6-706
$4.37
×1
Step-by-Step Instructions
You can use all of the items from our mix, or pick your favorites. Try a whole new direction and shop all of our other jewelry-making components to create your own style inspired by some pieces from this mix . Remember, you can use the categories on the left of our search pages to shop by color, theme, and more.
Make something special with your chosen items. You can use these pieces for making necklaces, bracelets, earrings, or something else entirely. Try making a matching jewelry set. See what Cynthia made with these items while watching the video. You'll find basic instructions for each design she made in the steps below. If you need more inspiration, make sure to check out all of the fabulous free instructions in our Design Studio.
Necklace with TierraCast Flora Focal
Attach a 22mm metallic cap pear-shaped pendant in Aquamarine Light Chrome to the center of the TierraCast antique pewter reversible Flora crescent link using a sterling silver 6.85mm open jump ring.
Cut a length of jewelry wire approximately seven inches long. Slide a silver-plated 2x2mm crimp tube onto the end of the wire. Bring the end through the opening on one side of the Flora link and back through the crimp tube. Crimp in place. Repeat on the other side of the Floral link.
Add the following pattern to the wire: One TierraCast antique rhodium 4mm beaded bead cap, one 6mm faceted round in Aquamarine Shimmer, one 6mm round pearl in Crystal Iridescent Light Blue, one 6mm faceted round, one bead cap, and three 4mm XILION bicones in Tanzanite AB 2x. Repeat this pattern twice, leaving off the last set of Tanzanite bicones. Repeat the entire pattern on the other side of the necklace, too.
Slide a crimp tube onto the end of one wire, followed by the last link of a 6-inch length of antique silver-plated textured oval link chain. Bring the wire back through the crimp tube and crimp in place. Repeat on the other side of the necklace.
Attach each half of the JBB antique silver-plated pewter ivy leaf toggle clasp to each end of the necklace using a sterling silver 4.60mm open jump ring for each.
Cut a length of silver-plated 1+1 infinity link chain approximately 16 ½ inches long.
Slide a 3mm XILION bicone in Capri Blue AB onto a 2-inch 22 gauge sterling silver eye pin, followed by a 8mm butterfly in Aquamarine and another Capri Blue bicone. Attach this dangle to the center oval link of the chain by making a wrapped loop. Attach a 10mm classic cut pendant in Crystal Bermuda Blue to the bottom of the eye pin using a 6.85mm jump ring.
Add a Capri Blue bicone, a butterfly, and a Capri Blue bicone to a 2-inch 24 gauge sterling silver head pin. Attach this dangle to the second oval link over from the center by making a wrapped loop. Repeat on the other side of the focal.
Add a Capri Blue bicone, a butterfly, and a Capri Blue bicone to a head pin. Attach this dangle to the fourth oval link over from the center by making a wrapped loop. Repeat on the other side of the focal.
Attach a JBB sterling silver 16mm spiral toggle clasp to each end of the necklace using a 4.60mm jump ring for each end.
Cut a length of jewelry wire approximately six inches long. Slide a crimp tube onto one end and slide on a 4.60mm jump ring connected to the last link of a 6-inch length of sterling silver dapped cable chain. Bring the wire back through the crimp tube and crimp in place.
Add the following pattern to the wire: Three Capri Blue bicones, one 4mm XILION bicone in Light Sapphire, one Indian silver 5mm daisy spacer, one 6mm faceted round, one daisy spacer, one 4mm Light Sapphire bicone, three Capri Blue bicones.
Add a Light Sapphire bicone to a Bali silver head pin with large granulations, followed by a Grace Lampwork water lily garden pillow bead and another Light Sapphire bicone. Make a wrapped loop at the top of the beads. Add this focal to your wire and make a mirror image of the bead pattern on the other side of the focal.
Add a crimp tube to the end of the wire, followed by a jump ring attached to a 6-inch length of chain. Bring the wire back through the crimp tube and crimp in place.
Add a toggle clasp to the ends of the necklace using a jump ring for each end.
Add a Light Sapphire bicone to a Bali silver head pin, followed by a water lily bead, and a Light Sapphire bicone. Make a wrapped loop at the top of the beads.
Attach an eye pin to the top of the wrapped loop. Add a Capri Blue bicone to the eye pin, followed by a daisy spacer, a 6mm faceted round, a daisy spacer, and a Capri Blue bicone. Make a wrapped loop at the top of the beads.
Open the loop of a 925/10 silver-filled 14.5mm 22 gauge earwire and attach it to the top of your earring. Close the loop.
Add a Capri Blue bicone to an eye pin, followed by a butterfly bead, a beaded bead cap, a Tanzanite bicone, a bead cap, and a Capri Blue bicone. Make a wrapped loop at the top of the beads.
Add a classic cut pendant to the bottom of your link using a 4.60mm jump ring.
Open the loop of an earwire and add it to the top of your earring. Close the loop.