It's easy to mix and match bracelet strands to create interchangeable style with Hiilos clasps.
Create your peyote stitch bands using odd-count peyote stitch and the colors and diagrams listed in our PDF Diagram.
Odd Count Peyote Video Tutorial
Odd-Count Peyote Stitch PDF Diagram
Wave Breaker PDF Diagram
Use pliers to gently open an 11mm tube for Hiilos interchangeable clasps. Add the end of one of the peyote bands into the tube. Close the ends of the tube and squeeze the tube shut around the band. Repeat on the other end of the band with another tube. Repeat this step for the other peyote band.
How to Finish a Peyote Band for a Hiilos Interchangeable Clasp Video
Cut a length of jewelry wire approximately 12 inches. Slide a crimp tube onto the end of the wire, followed by an 11/0 seed bead. Bring the wire back through the crimp tube and crimp in place.
Add 3 Czech glass 2mm topaz luster iris round beads to the wire, then add the following pattern:
Repeat this pattern 5 times, then add 3 Czech glass roundel beads and 3 Czech glass 2mm beads. Add a crimp tube to the wire, followed by a seed bead. Bring the wire back through the crimp tube and crimp in place. Hide the crimps on each end of the strand with a crimp cover each.
Cut a length of Leather Cord USA 2mm 3-strand metallic teal flat braided leather to the same length as the beaded strand you just created. Use pliers to gently open an 11mm tube for Hiilos interchangeable clasps. Add the end of the beaded strand and then the leather strand into the tube. Close the ends of the tube and squeeze the tube shut around the strands. Repeat on the other end of the strands with another tube.
How to Finish a Beaded Strand for a Hiilos Interchangeable Clasp Video
Cut a length of jewelry wire approximately 12 inches. Slide a crimp tube onto the end, followed by a seed bead. Bring the wire back through the crimp tube and crimp in place. Then, add the following pattern:
Repeat this pattern 5 times, leaving off the last Bicone and seed bead. Add a crimp tube and seed bead to the strand, bring the wire back through the crimp tube and crimp in place. Hide the crimp on each end of the strand with a crimp cover each.
Cut a length of ball chain to the same length as the beaded strand. Cut a length of cable chain to the same length. Attach a jump ring to the end of the cable chain. With the jump ring still open, add a seed bead. Close the jump ring. Repeat for the other end of the chain.
Use pliers to gently open an 11mm tube for Hiilos interchangeable clasps. Add the end of the beaded strand in, followed by the seed bead on the end of the cable chain strand. Then, add the end of the ball chain strand. Close the ends of the tube and squeeze the tube shut around the strands. Repeat on the other end of the strands with another tube.
Cut a length of jewelry wire approximately 12 inches. Slide a crimp tube onto the end of the wire, followed by a seed bead. Bring the wire back through the crimp tube and crimp in place. Add the following pattern to the wire:
Add a crimp tube to the end of the strand followed by a seed bead. Bring the wire back through the crimp tube and crimp in place. Hide the crimps on each end of the strand with a crimp cover.
Cut a length of jewelry wire approximately 12 inches. Slide a crimp tube onto the end of the wire, followed by a seed bead. Bring the wire back through the crimp tube and crimp in place. Add 39 Czech glass 4mm round beads to the wire. Add a crimp tube and a seed bead. Bring the wire back through the crimp tube and crimp in place. Hide the crimps on each end of the strand with a crimp cover.
Cut a length of Leather Cord USA 1.5mm natural light brown round leather to the same length as the beaded strands. Attach the TierraCast bezel charm with Aquamarine crystal to the center of the strand using a copper jump ring. Clamp the copper crimp covers down around the leather on either side of the charm to keep it in place.
Cu a length of oval link chain to the same length as the beaded strands and the leather strands. Add a jump ring to one end. With the jump ring still open, add a seed bead. Close the jump ring. Repeat on the other end of the chain.
Use pliers to gently open a 20mm tube for Hiilos interchangeable clasps. Add the end of the leather strand, followed by the Czech glass round bead strand, the Tiger Iron strand, and the chain strand. Close the ends of the tube and squeeze the tube shut around the strands. Repeat on the other end of the strands with another tube.
Slide the desired tubes into one side of a Hiilos 22mm or 45mm clasp and then slide the tubes on the other ends of the bracelets into the other side of the clasp in reverse order. You can also try different Hiilos clasps sizes for larger or smaller bracelet stacks.
Nice choice! All or most of the products needed for this project are shown below with quantities. Sometimes we sell out of components and aren’t able to order more from the manufacturer (we know, it is very disappointing to us, too). Use the opportunity to mix up the design and make it yours by substituting similar products or altering the entire color scheme—it’s up to you!
It's easy to mix and match bracelet strands to create interchangeable style with Hiilos clasps.
Create your peyote stitch bands using odd-count peyote stitch and the colors and diagrams listed in our PDF Diagram.
Odd Count Peyote Video Tutorial
Odd-Count Peyote Stitch PDF Diagram
Wave Breaker PDF Diagram
Use pliers to gently open an 11mm tube for Hiilos interchangeable clasps. Add the end of one of the peyote bands into the tube. Close the ends of the tube and squeeze the tube shut around the band. Repeat on the other end of the band with another tube. Repeat this step for the other peyote band.
How to Finish a Peyote Band for a Hiilos Interchangeable Clasp Video
Cut a length of jewelry wire approximately 12 inches. Slide a crimp tube onto the end of the wire, followed by an 11/0 seed bead. Bring the wire back through the crimp tube and crimp in place.
Add 3 Czech glass 2mm topaz luster iris round beads to the wire, then add the following pattern:
Repeat this pattern 5 times, then add 3 Czech glass roundel beads and 3 Czech glass 2mm beads. Add a crimp tube to the wire, followed by a seed bead. Bring the wire back through the crimp tube and crimp in place. Hide the crimps on each end of the strand with a crimp cover each.
Cut a length of Leather Cord USA 2mm 3-strand metallic teal flat braided leather to the same length as the beaded strand you just created. Use pliers to gently open an 11mm tube for Hiilos interchangeable clasps. Add the end of the beaded strand and then the leather strand into the tube. Close the ends of the tube and squeeze the tube shut around the strands. Repeat on the other end of the strands with another tube.
How to Finish a Beaded Strand for a Hiilos Interchangeable Clasp Video
Cut a length of jewelry wire approximately 12 inches. Slide a crimp tube onto the end, followed by a seed bead. Bring the wire back through the crimp tube and crimp in place. Then, add the following pattern:
Repeat this pattern 5 times, leaving off the last Bicone and seed bead. Add a crimp tube and seed bead to the strand, bring the wire back through the crimp tube and crimp in place. Hide the crimp on each end of the strand with a crimp cover each.
Cut a length of ball chain to the same length as the beaded strand. Cut a length of cable chain to the same length. Attach a jump ring to the end of the cable chain. With the jump ring still open, add a seed bead. Close the jump ring. Repeat for the other end of the chain.
Use pliers to gently open an 11mm tube for Hiilos interchangeable clasps. Add the end of the beaded strand in, followed by the seed bead on the end of the cable chain strand. Then, add the end of the ball chain strand. Close the ends of the tube and squeeze the tube shut around the strands. Repeat on the other end of the strands with another tube.
Cut a length of jewelry wire approximately 12 inches. Slide a crimp tube onto the end of the wire, followed by a seed bead. Bring the wire back through the crimp tube and crimp in place. Add the following pattern to the wire:
Add a crimp tube to the end of the strand followed by a seed bead. Bring the wire back through the crimp tube and crimp in place. Hide the crimps on each end of the strand with a crimp cover.
Cut a length of jewelry wire approximately 12 inches. Slide a crimp tube onto the end of the wire, followed by a seed bead. Bring the wire back through the crimp tube and crimp in place. Add 39 Czech glass 4mm round beads to the wire. Add a crimp tube and a seed bead. Bring the wire back through the crimp tube and crimp in place. Hide the crimps on each end of the strand with a crimp cover.
Cut a length of Leather Cord USA 1.5mm natural light brown round leather to the same length as the beaded strands. Attach the TierraCast bezel charm with Aquamarine crystal to the center of the strand using a copper jump ring. Clamp the copper crimp covers down around the leather on either side of the charm to keep it in place.
Cu a length of oval link chain to the same length as the beaded strands and the leather strands. Add a jump ring to one end. With the jump ring still open, add a seed bead. Close the jump ring. Repeat on the other end of the chain.
Use pliers to gently open a 20mm tube for Hiilos interchangeable clasps. Add the end of the leather strand, followed by the Czech glass round bead strand, the Tiger Iron strand, and the chain strand. Close the ends of the tube and squeeze the tube shut around the strands. Repeat on the other end of the strands with another tube.
Slide the desired tubes into one side of a Hiilos 22mm or 45mm clasp and then slide the tubes on the other ends of the bracelets into the other side of the clasp in reverse order. You can also try different Hiilos clasps sizes for larger or smaller bracelet stacks.
