Create the perfect fall earrings with crystals and some fun leaf-themed beads. Please note that these earrings were created with beads that were offered as a gift with purchase and may not be available to order on our website. We have listed similar components in the supplies for this project.
Slide a Burgundy bicone onto a silver head pin, followed by an 18mm briolette bead and a Peridot bicone. Make a wrapped loop at the top of the beads.
Slide a Crystal Iridescent Red pearl onto a gold eye pin and make a simple loop at the top of the bead. Connect this link to the wrapped loop at the top of the dangle you made in the previous step.
Cut a length of 24 gauge Gold Artbeads Designer Wire approximately 12 inches long. Coil one end of the wire around one side of the Nunn Design hoop about five times. Then, add a Czech glass fuchsia and yellow transparent mix matte with dark bronze wash small leaf bead, a Dakota Stones rondelle bead, a Czech glass mustard and red opaque mix with dark bronze wash small leaf bead, a rondelle, and a fuchsia and yellow leaf bead. Make sure the leaves hang within the hoop and tightly coil the other end of the wire around the other side of the hoop 5 times. Trim any wire ends and tuck them behind the hoop.
Attach your beaded dangles to the bottom of the hoop using a jump ring. Attach an earwire to the top of the hoop using another jump ring.
Repeat these steps to make the other earring.
5040 18mm Briolette Bead Crystal Red Magma (5040-RMM18, qty 2)
5328 6mm Bicone Peridot (5328-PER6, qty 2)
5810 6mm Round Pearl Crystal Iridescent Red (5810-CIR6, qty 2)
5328 4mm Bicone Burgundy (5328-BURG4, qty 2)
Nunn Design Antique Copper-Plated Brass Large Organic Hoop (EMBMT-0823, qty 2)
Czech Glass 10x6mm Fuchsia and Yellow Transparent Mix Matte with Dark Bronze Wash Small Leaf Bead Strand by Raven's Journey (BEADS7589, qty 1)
Czech Glass 10x6mm Mustard and Red Opaque Mix with Dark Bronze Wash Small Leaf Bead Strand by Raven's Journey (BEADS7591, qty 1)
Dakota Stones Light Gold-Plated Hematite 2mm Rondelle Bead Strand (R1375, qty 1)
Antique Silver-Plated Earwire with Coil and Beaded Disk (Pair) (EAR-0084, qty 1)
Sterling Silver Open Jump Ring - 0.030 x .230 inches (0.75 x 5.85mm) (SS-OJR30-G, qty 4)
Artbeads Designer Wire - Gold Non-Tarnish 24 Gauge (36 ft. spool) (ADW0053, qty 1)
2-inch Silver-Plated 20 Gauge Head Pin (SP-HP20-22, qty 2)
Gold-Filled 1.5-Inch Eye Pin (GF-EP150-020, qty 2)
Nice choice! All or most of the products needed for this project are shown below with quantities. Sometimes we sell out of components and aren’t able to order more from the manufacturer (we know, it is very disappointing to us, too). Use the opportunity to mix up the design and make it yours by substituting similar products or altering the entire color scheme—it’s up to you!
Create the perfect fall earrings with crystals and some fun leaf-themed beads. Please note that these earrings were created with beads that were offered as a gift with purchase and may not be available to order on our website. We have listed similar components in the supplies for this project.
Slide a Burgundy bicone onto a silver head pin, followed by an 18mm briolette bead and a Peridot bicone. Make a wrapped loop at the top of the beads.
Slide a Crystal Iridescent Red pearl onto a gold eye pin and make a simple loop at the top of the bead. Connect this link to the wrapped loop at the top of the dangle you made in the previous step.
Cut a length of 24 gauge Gold Artbeads Designer Wire approximately 12 inches long. Coil one end of the wire around one side of the Nunn Design hoop about five times. Then, add a Czech glass fuchsia and yellow transparent mix matte with dark bronze wash small leaf bead, a Dakota Stones rondelle bead, a Czech glass mustard and red opaque mix with dark bronze wash small leaf bead, a rondelle, and a fuchsia and yellow leaf bead. Make sure the leaves hang within the hoop and tightly coil the other end of the wire around the other side of the hoop 5 times. Trim any wire ends and tuck them behind the hoop.
Attach your beaded dangles to the bottom of the hoop using a jump ring. Attach an earwire to the top of the hoop using another jump ring.
Repeat these steps to make the other earring.
5040 18mm Briolette Bead Crystal Red Magma (5040-RMM18, qty 2)
5328 6mm Bicone Peridot (5328-PER6, qty 2)
5810 6mm Round Pearl Crystal Iridescent Red (5810-CIR6, qty 2)
5328 4mm Bicone Burgundy (5328-BURG4, qty 2)
Nunn Design Antique Copper-Plated Brass Large Organic Hoop (EMBMT-0823, qty 2)
Czech Glass 10x6mm Fuchsia and Yellow Transparent Mix Matte with Dark Bronze Wash Small Leaf Bead Strand by Raven's Journey (BEADS7589, qty 1)
Czech Glass 10x6mm Mustard and Red Opaque Mix with Dark Bronze Wash Small Leaf Bead Strand by Raven's Journey (BEADS7591, qty 1)
Dakota Stones Light Gold-Plated Hematite 2mm Rondelle Bead Strand (R1375, qty 1)
Antique Silver-Plated Earwire with Coil and Beaded Disk (Pair) (EAR-0084, qty 1)
Sterling Silver Open Jump Ring - 0.030 x .230 inches (0.75 x 5.85mm) (SS-OJR30-G, qty 4)
Artbeads Designer Wire - Gold Non-Tarnish 24 Gauge (36 ft. spool) (ADW0053, qty 1)
2-inch Silver-Plated 20 Gauge Head Pin (SP-HP20-22, qty 2)
Gold-Filled 1.5-Inch Eye Pin (GF-EP150-020, qty 2)
