Sale
Sale

$54.18

Reg. $76.07

Lindstrom

Lindstrom Supreme cutter (End, flush)

CODE: TOOL-601

Options

$54.18

Reg. $76.07

Quantity:

in stock

Measurements & Specs

CODE:: TOOL-601
Origin:: Spain
Sold:: Individually

Description

Write a Review Ask a Question

Customers Also Viewed

Taper head cutters are very popular. The pointed head allows for increased cutting access yet has sufficient strength to avoid tip breakage when used within its capacity. Get into those small coils and trim away the sharp edges when you are doing wire work that will be worn next to the skin. The ergonomic handles are 4.8 inches, fitting the average hand much better than the smaller tools on the market and allowing for easier repetitive use without fatigue. Recommended for use on soft wire no larger than 18 gauge. — Add to Cart

Taper head cutters are very popular. The pointed head allows for increased cutting access yet has sufficient strength to avoid tip breakage when used within its capacity. Get into those small coils and trim away the sharp edges when you are doing wire work that will be worn next to the skin. The ergonomic handles are 4.8 inches, fitting the average hand much better than the smaller tools on the market and allowing for easier repetitive use without fatigue. The flush cutting edge means that both cutting edges receive a tiny bevel by diamond honing over the entire outer length. The bevels are at 60 degrees to the plane of the cutting surface. They are no more than 0.12mm in width and thus form an exceptionally small V-shaped groove along the edges. It also yields only the tiniest raised surface, or pinch, on the cut lead. Recommended for use on soft wire no larger than 16 gauge. — Add to Cart

Tronex oval head cutters are great for general use. The ergonomic handles are 4.8 inches, fitting the average hand much better than the smaller tools on the market and allowing for easier repetitive use without fatigue. The flush cutting edge means that both cutting edges receive a tiny bevel by diamond honing over the entire outer length. The bevels are at 60 degrees to the plane of the cutting surface. They are no more than 0.12mm in width and thus form an exceptionally small V-shaped groove along the edges. It also yields only the tinniest raised surface, or pinch, on the cut lead. Recommended for use on soft wire no larger than 16 gauge. — Add to Cart

You'll love completing jewelry designs with these cutter pliers. Lindstrom's RX series flush cutter pliers are great for trimming wire components like eye pins, head pins, and beading wire. The handles make possible complete hand control for precision work. The innovative spring mechanism reduces spring tension during work, which lessens fatigue. Barely any effort is needed to close these pliers, making them a great option for smaller hands. You can also adjust the tension and opening width with the spring mechanism. Cuts wire up to 18 Gauge — Add to Cart

Tronex oval head cutters make for an essential wire cutting tool. They are for general use. The ergonomic handles are 4.8 inches, fitting the average hand much better than the smaller tools on the market and allowing for easier repetitive use without fatigue. The Razor Flush edge has no bevel on either cutting edge. The back side is absolutely flat at an angle of 45 degrees to the plane of the cutting surfaces. The exceptionally sharp edges produce cuts with virtually no raised surface on the lead (under a loupe you can see a line on the lead where the edges come together but you will not see a pinch). Also, minimum shock is imparted to the cut lead or component. However, more frequent sharpening is required with a Razor Flush cutter. The Razor Flush edge finish on Tronex cutters is executed by a proprietary process and thus unmatched by any other precision cutting tool in the world. It is also the edge finish selected for almost all specialty cutters (tip cutters and angulated cutters) made by Tronex. Recommended for use on soft wire no larger than 18 gauge. — Add to Cart

Jewelry-making projects are a breeze with the Casual Comfort flush cutter pliers from The Beadsmith. These flush cutters feature a European-quality grip for comfortable use every time. Flush cutters may be used to trim soft craft wire, head pins, and eye pins. They should not be used to cut memory wire, flex wire, or steel wire. They can fit into tight places and will produce a flat, even cut so less filing and cleanup is needed. Cut with the concave side of the cutters facing the waste end of your wire so the flush cut wire end is on your project. — Add to Cart

Give your designs a unique accent with this clasp set. This set features a hook made from a looped wire shape and an eye that takes on a similar round shape. When hooked together, this set creates an artisan style and will keep designs secure. A loop is attached to each end, so you can easily add it to your designs. Try it for a fun necklace. You'll love the versatile and high-quality sterling silver shine. It works with any color palette.Hook: 17.2 x 14.7mm, Eye: 17.0 x 14.5mm — Add to Cart

Ever try to get your fingers through most small scissors? Here's an improvement you'll appreciate - larger loops. These scissors make cutting easier with precision and comfort. It's a great option for cutting bead cord, thread, and other light cutting jobs. These scissors feature gold colored handles and a straight blade with the overall length of 4-inches. It is made of stainless steel, so it's a durable option for your collection of tools.Length 4-inches — Add to Cart

This side cutter features a semi-flush regular jaw. The fine, slim head allows cutters to reach tight spaces, so it's perfect for jewelry making. Use these cutters to trim head pins, eye pins, and other craft wire. This high-quality tool will become an essential in your beading box. They are easy to use and will come in handy in many different projects.4.5 Inches — Add to Cart

This regular-jaw, semi-flush cutter is made in Germany with the finest tool steel and is beautifully polished with box-joint construction and double leaf springs. The 4 3/4-inch ergonomic handles are designed for repetitive use. With a handle width of 3/4 inch and a soft non-slip texture, the user is assured of less fatigue. The handle contact is 300% greater than with conventional handles. Try this wonderful tool for more comfort as you work. This tool is recommended for use with 20 gauge wire and finer.4 3/4 inches — Add to Cart

These side cutters offer the user true ergonomics at very reasonable pricing. They feature precision heads and well-tapered jaws for fine or delicate work. The handles are longer than normal but closer together for less stress on the users hands. This ergonomic economy tool offers double leaf springs and cushion PVC grips. This tool is recommended for use with 22 gauge wire and finer. Use it to trim and cut wire.6 inches — Add to Cart

Make flush cuts easily with the Beadalon Designer Flush Cutter. This ultra high-quality cutter is an excellent choice for making flush cuts in Beadalon beading wires, Artistic Wire, and other soft wires. It features ergonomic handles and spring tension, so production is easier and less tiresome. It will cut copper wire up to 2mm in diameter. Use these flush cutters to trim eye pins, head pins, and more. Please note that these pliers are not for use with memory wire. — Add to Cart

With it simple design and silver coloring, this hook and eye clasp set is sure to work well into hundreds of jewelry designs. This oxidized, sterling silver clasp is a handcrafted work of art and is of the highest quality, so it will keep your designs together.There may be slight variation in appearances, since each piece is hand-crafted from .925 sterling silver by silversmiths in Bali, Indonesia.Total Length 15mm — Add to Cart

The Lindstrom supreme cutter with micro-beveled edge is one of the finest tools in the industry, used by jewelers and craftspeople around the world. These cutters are unsurpassed in material, design, and performance. The precise jaw alignment, German lap-joint engineering, and double leaf springs are easier on your hands, so beading is a breeze. This amazing tool is recommended for use with 18 gauge wire and finer. Warning: Using this tool to cut materials other than copper may damage this tool. A Jewel This is a jewel of a cutter. So sharp, so precise. Worth every penny. Viv, Serious Artbeader — Add to Cart

Be inspired by this wonderful mix of vintage Czech glass beads. This mix is part of the Vacation Destination series, inspired by wonderful views and lively locations. The Brighton Beach mix features a variety of sandy and amber tones, alongside rocky greys. A wide variety of shapes and sizes are included, so you are sure to find something to bring that extra sparkle to your next design. — Add to Cart

For precision work and fine details, try the Bausch & Lomb 10x Coddington Magnifier. It's great for working with seed beads, beading needles, and more. It features a 10x magnification power, so it makes it easy to see small details. It has a focal distance of 25mm. Diopers are 40D and the focal distance is 1.0 inch. Diameter is 19.8mm (0.8 inches) — Add to Cart

You love the look of these Artbeads sterling silver classy pseudo-teardrop ear posts. They feature a teardrop-like rounded diamond shape. There is a hole at the bottom to add dangles or other design elements. You can find earring backs for these posts in our Clutches & Earring Backs section. These posts feature a versatile sterling silver shine that will work with any color palette. Dimensions: 11 x 8mm, Hole Size: 1.0mm, Post Thickness: 0.89mm (About 19 Gauge) — Add to Cart

Add a floral touch to your designs with this sterling silver leaf design toggle clasp. This clasp features a hammered design that provides an interesting texture. On the front side of the loop is a detailed flower with two leaves. The loop and the bar each have a closed loop allowing you to easily add this clasp to your designs. The versatile silver shine of this clasp will work with all kinds of designs. Dimensions: Bar: 37 x 3mm, Loop 22mm Diameter Hole Size: Loop: 3mm, Bar 2mm — Add to Cart

Layer your necklace designs with ease using this tube clasp. This tube clasp features spring rings attached on one half of the clasp. Attach the spring rings of your necklaces to the open loops on the other half of the clasp and then attach the loops on the other end of your necklaces to the already attached spring rings. This allows you to put multiple necklaces on without having to open and close the individual clasps each time. Your necklaces won't get tangled while wearing and you can even load up the necklaces ahead of time and take them all together (the way you want to wear them) while traveling. Change out the necklaces for endless style possibilities. — Add to Cart

Cupid's arrow has struck This toggle clasp features a sweet style that's perfect for Valentine's Day jewelry projects or anything that needs a touch of romance. The loop component is shaped like a heart and the bar component is shaped like an arrow. The arrow fits through the heart to keep your jewelry designs in place while wearing. Use it for delicate necklaces and bracelet designs. It features a versatile silver shine that will work with any color palette.Arrow Dimensions 16 x 2mm, Heart Dimensions 13.5 x 10mm — Add to Cart

Finish designs with this sterling silver spring ring. This simple spring ring is circular in shape with a trigger mechanism to open the clasp. This clasp is sure to keep your designs secure while staying stylish. A flat closed loop is attached to the ring, so you can easily add it to designs. The small, lightweight design makes it great for incorporating into delicate looks. The versatile silver shine will work with any color palette.Small Ring Inside Diameter 1.4mm, — Add to Cart

Layer your necklace designs with ease using this tube clasp. This tube clasp features spring rings attached on one half of the clasp. Attach the spring rings of your necklaces to the open loops on the other half of the clasp and then attach the loops on the other end of your necklaces to the already attached spring rings. This allows you to put multiple necklaces on without having to open and close the individual clasps each time. Your necklaces won't get tangled while wearing and you can even load up the necklaces ahead of time and take them all together (the way you want to wear them) while traveling. Change out the necklaces for endless style possibilities. — Add to Cart

Make sure your designs stay put while wearing them with this trigger clasp. This bold, oval-shaped trigger clasp will make a secure and stylish finishing touch for your designs. It's the perfect size for using in necklaces and bracelets. The versatile style will work with any project. This clasp features a versatile silver shine that will work with any color palette you may have in mind. — Add to Cart

Create seamless style with help from this sterling silver swivel clasp. This oval-shaped clasp features a trigger mechanism that will provide great security for your designs. The clasp is attached to a swivel mechanism, so it will move seamlessly with your designs and rest comfortably while you're wearing it. The swivel includes a small loop, so you can easily add it to designs. This versatile clasp will work in necklace and bracelet designs. It feature a silver shine full of versatility. — Add to Cart

Complete designs with the sterling silver lobster clasp with ring. This versatile lobster clasp is sure to keep your designs secure. A jump ring is attached to the clasp, so you can easily add it to a jewelry strand and know it will stay in place. The size of this clasp is great for all kinds of designs. Try using it in bracelet and necklace projects. This clasp features a versatile silver shine that will work with any color palette you may have in mind. — Add to Cart

Style and function are combined in these Chroma Series tools from The BeadSmith. These pliers are made from hardened stainless steel with a rainbow titanium coating for an out-of-this-world look. You'll always know which tools are yours when you use these beauties. The handles feature a comfortable contoured grip that's easy to grasp. With extra-fine tips and a box joint mechanism, you'll delight in working with these tools. These pliers feature one round nose mandrel and a concave mandrel. You can bend your wire in a half-circle around the round nose. Move the pliers one or two more times around and you have a complete circle. These pliers are great for wire wrapping. — Add to Cart

Categories
Account
More

Account

Sign In

Email Address:

Password:

Forgot your password? Create Account
- #seriousArtbeader