Do a two-seed-bead back stitch to embellish the Golem Design Studio stoneware brown with pink and tan flowers round cabochon. Add a second layer of bead backing or use a piece of felt from a craft store to hide the stitching.
Glue the TierraCast antique copper heart bail glue pad to the finished cabochon using 5-minute two-part epoxy. Allow the glue to dry.
Cut three strands of jewelry wire approximately 21 inches long. Attach one end from each strand to its own 4mm copper-plated 18 gauge open jump ring using a 14K/20 gold-filled 2x2mm crimp tube.
String a random pattern of 3mm dark brown Czech round beads, 3mm copper-plated Czech round beads, 3mm bicones in Indian Pink and 4mm bicones in Lime onto each wire. When you reach the center of the strands, thread the pendant bail onto all three strands. Finish the strands with more Czech round beads and bicones in a random fashion. Use bead stoppers where needed to hold your beads in place as you work.
Attach the finished wire strands to a second set of jump rings using crimp tubes.
Connect all three strands together using one 8mm antique copper-plated open jump ring on each end.
Attach the loop portion of the JBB antique copper-plated pewter flower toggle clasp to one 8mm jump ring from step seven and the bar portion to the other 8mm jump ring.
List of Components: Czech Glass Round Beads 3mm Dark Brown (120pc Pack) (DRUKS-DBR3, qty 2) Czech Glass Round Beads 3mm Copper-Plated (120pc Pack) (DRUKS-COP3, qty 2) JBB Antique Copper-Plated Pewter Flower Toggle Clasp (PCA-TOG003, qty 1) TOHO Bead Cube 1.5mm Gold-Lustered Green Tea (TBCB1-457, qty 1) TOHO Bead Round 8/0 Dark Copper (TBRD8-222, qty 1) TOHO Bead Triangle 11/0 Matte Galvanized Gold Satin (TBTR11-557F, qty 1) TOHO Bead Round Hybrid 11/0 Metallic Copper Penny (TBRD11-Y750, qty 1) Stoneware Brown with Pink and Tan Flowers Round Cabochon (CAB-0109, qty 1) TierraCast Antique Copper Heart Bail Glue Pad (CA-5733, qty 1) 4mm Copper-Plated 18 Gauge Open Jump Ring (BC-OJR04, qty 6) 8mm Antique Copper-Plated Open Jump Ring (BCA-OJR08, qty 2) 14K/20 Gold-Filled 2x2mm Crimp Tube (GF-CRM2, qty 6) 5328 3mm Bicone Indian Pink (5328-INP3, qty 103) 5328 4mm Bicone Lime (5328-LIME4, qty 92)
Add all available items to your cart at once or edit the quantities below.
Any items with quantities lower than stated minimums will default to the minimum in your cart.
Nice choice! All or most of the products needed for this project are shown
below with quantities. Sometimes we sell out of components and aren’t able to order more from
the manufacturer (we know, it is very disappointing to us, too). Use the opportunity to mix up
the design and make it yours by substituting similar products or altering the entire color
scheme—it’s up to you!
TOHO Bead Cube 1.5mm Gold-Lustered Green Tea, 2.5-Inch Tube
Code TBCB1-457
$4.84
×1
8mm Antique Copper-Plated Open Jump Ring - Min Qty 20
Code BCA-OJR08
$0.07
×2
Clearance - Was $9.59 - Nipper Tool
Code TOOL-101
$6.46
$9.59
×1
Golem Design Studio Stoneware Brown with Pink and Tan Flowers Round Cabochon
Code CAB-0109
$33.39
×1
The BeadSmith 11 Short Beading Needles 12-Pack
Code NEED-10
$3.77
×1
Bead Stopper - 6-Piece Pack
Code BEADSTPR
$6.49
×1
Czech Glass Round Beads 3mm Dark Brown (100pc Strand) by Starman
Code CDRUK-DBR3
$2.69
×2
Step-by-Step Instructions
Do a two-seed-bead back stitch to embellish the Golem Design Studio stoneware brown with pink and tan flowers round cabochon. Add a second layer of bead backing or use a piece of felt from a craft store to hide the stitching.
Glue the TierraCast antique copper heart bail glue pad to the finished cabochon using 5-minute two-part epoxy. Allow the glue to dry.
Cut three strands of jewelry wire approximately 21 inches long. Attach one end from each strand to its own 4mm copper-plated 18 gauge open jump ring using a 14K/20 gold-filled 2x2mm crimp tube.
String a random pattern of 3mm dark brown Czech round beads, 3mm copper-plated Czech round beads, 3mm bicones in Indian Pink and 4mm bicones in Lime onto each wire. When you reach the center of the strands, thread the pendant bail onto all three strands. Finish the strands with more Czech round beads and bicones in a random fashion. Use bead stoppers where needed to hold your beads in place as you work.
Attach the finished wire strands to a second set of jump rings using crimp tubes.
Connect all three strands together using one 8mm antique copper-plated open jump ring on each end.
Attach the loop portion of the JBB antique copper-plated pewter flower toggle clasp to one 8mm jump ring from step seven and the bar portion to the other 8mm jump ring.
List of Components: Czech Glass Round Beads 3mm Dark Brown (120pc Pack) (DRUKS-DBR3, qty 2) Czech Glass Round Beads 3mm Copper-Plated (120pc Pack) (DRUKS-COP3, qty 2) JBB Antique Copper-Plated Pewter Flower Toggle Clasp (PCA-TOG003, qty 1) TOHO Bead Cube 1.5mm Gold-Lustered Green Tea (TBCB1-457, qty 1) TOHO Bead Round 8/0 Dark Copper (TBRD8-222, qty 1) TOHO Bead Triangle 11/0 Matte Galvanized Gold Satin (TBTR11-557F, qty 1) TOHO Bead Round Hybrid 11/0 Metallic Copper Penny (TBRD11-Y750, qty 1) Stoneware Brown with Pink and Tan Flowers Round Cabochon (CAB-0109, qty 1) TierraCast Antique Copper Heart Bail Glue Pad (CA-5733, qty 1) 4mm Copper-Plated 18 Gauge Open Jump Ring (BC-OJR04, qty 6) 8mm Antique Copper-Plated Open Jump Ring (BCA-OJR08, qty 2) 14K/20 Gold-Filled 2x2mm Crimp Tube (GF-CRM2, qty 6) 5328 3mm Bicone Indian Pink (5328-INP3, qty 103) 5328 4mm Bicone Lime (5328-LIME4, qty 92)