For necklaces like chokers or collars, including an extender chain in the back is a good idea. These necklaces need a more precise fit and neck sizes vary.
WireLuxe and WireLace can help you create truly fabulous jewelry pieces, like this decadent necklace. Dripping in beautiful shades of blue, you'll love the luxury this necklace brings to your style Wear it to a formal occasion and become the belle of the ball or use it to dress up an outfit for a fun night out.
Cut a length of 1mm WireLace ribbon in silver blue approximately 3-4 inches long. String a 6mm bicone pendant in Crystal Blue Shade onto the center of the WireLace. Repeat this step four more times for a total of five dangles. See the tutorial for more help on attaching these dangles to the necklace.
Cut a length of WireLace ribbon approximately 16 inches. Thread the WireLace through the bottom edge of the WireLuxe, about half of an inch to the left of your first dangle. Knot and trim the WireLace tail on the back of the necklace. Add glue to the knot for more security.
String on a 6mm crystal globe bead in Crystal Blue Shade and thread the WireLace back through the WireLuxe so that the globe bead rests on top of the edge of the necklace. Next, add a 4mm faceted round in Montana Sapphire to the WireLace, followed by a globe bead, a faceted round, a bicone pendant, a faceted round, a globe bead and a faceted round. Bring the WireLace up through the edge of the WireLuxe about a half of an inch to the right of the first dangle, so that the dangling loop hangs nicely below your bicone pendant dangle. Repeat this step so that each bicone pendant dangle is nicely framed by a dangling loop. To keep your dangling loops from moving, add a dab of glue to each place where the WireLace goes through the edge of the WireLuxe. Knot the other end of the WireLace on the back of the necklace and trim any excess.
Add a JBB sterling silver U-shape 10mm ribbon end to each end of the necklace. We used adhesive to keep the ribbon ends in place. Add the S hook clasp to one of the ribbon ends using a sterling silver 4.9x7.6mm 19 gauge oval jump ring.
Cut a length of the 040 oval link sterling silver chain approximately three inches long, or however long you need to make the necklace fit nicely. String a globe bead onto a sterling silver 2 inch 24 gauge ball-end head pin and attach it to one end of the chain by creating a wrapped loop. Attach the other end of the chain to the open ribbon end using an oval jump ring.
List of Components: WireLuxe 20mm 24-Inch Denim Knitted Wire (STRNG-0152, qty 1) WireLace Ribbon 1mm Azure, 10 Yd Spool (STRNG-0171, qty 1) 5028 6mm Crystal Globe Bead Crystal Blue Shade (5028-BLS6, qty 30) 6328 6mm Bicone Pendant Crystal Blue Shade (6328-BLS6, qty 15) 5000 4mm Faceted Round Montana Sapphire (5000-MON4, qty 30) JBB Sterling Silver U-Shape 10mm Ribbon End (SS-ENDCAP04, qty 2) S Hook Clasp (SS-CL24, qty 1) 040 Oval Link Sterling Silver Chain (925CH38, qty 1) Sterling Silver 2 inch Ball-end Head Pin, 24 gauge (SS-BHP04, qty 1) Sterling Silver Oval Jump Ring 4.9x7.6mm, 19 gauge (SS-OJR-OV5, qty 2)
Add all available items to your cart at once or edit the quantities below.
Any items with quantities lower than stated minimums will default to the minimum in your cart.
Nice choice! All or most of the products needed for this project are shown
below with quantities. Sometimes we sell out of components and aren’t able to order more from
the manufacturer (we know, it is very disappointing to us, too). Use the opportunity to mix up
the design and make it yours by substituting similar products or altering the entire color
scheme—it’s up to you!
Please wait while we add the products to your cart.
What a Wonderful World Necklace Tutorial
Blue WireLuxe Necklace with Beaded Accents
designed byArtbeads
Skill LevelBeginner
Time1-3 Hours
Approximate Size16 Inches
For necklaces like chokers or collars, including an extender chain in the back is a good idea. These necklaces need a more precise fit and neck sizes vary.
WireLuxe and WireLace can help you create truly fabulous jewelry pieces, like this decadent necklace. Dripping in beautiful shades of blue, you'll love the luxury this necklace brings to your style Wear it to a formal occasion and become the belle of the ball or use it to dress up an outfit for a fun night out.
Supplies
040 Oval Link Sterling Silver Chain by the Foot
Code 925CH38
$4.64
$5.79
×1
Sterling Silver Oval Jump Ring 4.9x7.6mm, 19 gauge - Min Qty 2
Cut a length of 1mm WireLace ribbon in silver blue approximately 3-4 inches long. String a 6mm bicone pendant in Crystal Blue Shade onto the center of the WireLace. Repeat this step four more times for a total of five dangles. See the tutorial for more help on attaching these dangles to the necklace.
Cut a length of WireLace ribbon approximately 16 inches. Thread the WireLace through the bottom edge of the WireLuxe, about half of an inch to the left of your first dangle. Knot and trim the WireLace tail on the back of the necklace. Add glue to the knot for more security.
String on a 6mm crystal globe bead in Crystal Blue Shade and thread the WireLace back through the WireLuxe so that the globe bead rests on top of the edge of the necklace. Next, add a 4mm faceted round in Montana Sapphire to the WireLace, followed by a globe bead, a faceted round, a bicone pendant, a faceted round, a globe bead and a faceted round. Bring the WireLace up through the edge of the WireLuxe about a half of an inch to the right of the first dangle, so that the dangling loop hangs nicely below your bicone pendant dangle. Repeat this step so that each bicone pendant dangle is nicely framed by a dangling loop. To keep your dangling loops from moving, add a dab of glue to each place where the WireLace goes through the edge of the WireLuxe. Knot the other end of the WireLace on the back of the necklace and trim any excess.
Add a JBB sterling silver U-shape 10mm ribbon end to each end of the necklace. We used adhesive to keep the ribbon ends in place. Add the S hook clasp to one of the ribbon ends using a sterling silver 4.9x7.6mm 19 gauge oval jump ring.
Cut a length of the 040 oval link sterling silver chain approximately three inches long, or however long you need to make the necklace fit nicely. String a globe bead onto a sterling silver 2 inch 24 gauge ball-end head pin and attach it to one end of the chain by creating a wrapped loop. Attach the other end of the chain to the open ribbon end using an oval jump ring.
List of Components: WireLuxe 20mm 24-Inch Denim Knitted Wire (STRNG-0152, qty 1) WireLace Ribbon 1mm Azure, 10 Yd Spool (STRNG-0171, qty 1) 5028 6mm Crystal Globe Bead Crystal Blue Shade (5028-BLS6, qty 30) 6328 6mm Bicone Pendant Crystal Blue Shade (6328-BLS6, qty 15) 5000 4mm Faceted Round Montana Sapphire (5000-MON4, qty 30) JBB Sterling Silver U-Shape 10mm Ribbon End (SS-ENDCAP04, qty 2) S Hook Clasp (SS-CL24, qty 1) 040 Oval Link Sterling Silver Chain (925CH38, qty 1) Sterling Silver 2 inch Ball-end Head Pin, 24 gauge (SS-BHP04, qty 1) Sterling Silver Oval Jump Ring 4.9x7.6mm, 19 gauge (SS-OJR-OV5, qty 2)