Twilight Forest Live Challenge Mix

You can use all of the items from our mix, or pick your favorites. Try a whole new direction and shop all of our other jewelry-making components to create your own style inspired by some pieces from this mix . Remember, you can use the categories on the left of our search pages to shop by color, theme, and more.

Make something special with your chosen items. You can use these pieces for making necklaces, bracelets, earrings, or something else entirely. Try making a matching jewelry set. See what Cynthia made with these items while watching the video. You'll find basic instructions for each design she made in the steps below. If you need more inspiration, make sure to check out all of the fabulous free instructions in our Design Studio.,

Necklace

• Cut a length of jewelry wire approximately 22 inches long. Slide a gold crimp tube from the Beadalon mixed metals #2 crimp tube pack onto the wire, followed by a TierraCast gold-plated brass medium oval open jump ring attached to half of the gold-filled oval magnetic clasp. Bring the wire back through the crimp tube and crimp in place.
• Add the following pattern to the wire: One fire-polished 4mm bead in ColorTrends Saturated Metallic Russet Orange, three Czech glass 6mm Lt Teal AB fire-polished beads. Repeat this pattern five times, then add a Russet Orange bead and a Lt Teal bead.
• Add the following pattern to the wire: One TierraCast gold-plated pewter opulence teardrop bead, one TierraCast antique gold-plated pewter 7mm shell beadcap, one Czech glass 8mm ColorTrends Saturated Metallic Arcadia fire-polished bead, one 4mm faceted round in Crystal Copper, one Arcadia bead, one beadcap, one Lt Teal bead, one Russet Orange bead, one Lt Teal bead, one beadcap, one Arcadia bead, one Crystal Copper bead, one Arcadia bead, one bead cap, and one Russet Orange bead.
• Add a Gardanne Beads peppermint with amber accents small enameled maple leaf charm to the strand using three TierraCast small gold-plated brass open round jump rings linked together.
• Add two Russet Orange beads to the strand. Then, add the TierraCast antique gold-plated pewter 2-inch feather pendant to the strand using a round jump ring.
• Make a mirror image of the entire bead and charm pattern on the other side of the feather focal.
• Slide a crimp tube onto the end of the wire, followed by an oval jump ring attached to the other half of the clasp. Bring the wire back through the crimp tube and crimp in place.

Opening and Closing Jump Rings Video
Crimp Tool Tutorial
Crimp Tube Video Tutorial

Bracelet

• Cut a length of wire approximately 11 inches long. Slide a gold crimp tube onto one end, followed by an oval jump ring attached to half of the TierraCast antique gold melody clasp. Bring the wire back through the crimp tube and crimp in place.
• Add the following pattern to the wire: 8 Russet Orange beads, one beadcap, one Arcadia bead, one Crystal Copper bead, one Arcadia bead, one Crystal Copper bead, one Arcadia bead, and one Crystal Copper bead.
• Add an Opulence bead to the strand and then make a mirror image of the bead pattern on the other side of the Opulence bead.
• Slide a crimp tube onto the end of the wire, followed by an oval jump ring attached to the other half of the clasp. Bring the wire back through the crimp tube and crimp in place.

Opening and Closing Jump Rings Video
Crimp Tool Tutorial
Crimp Tube Video Tutorial

Wire-Wrapped Earrings

• Slide a Crystal Copper bead onto a gold-filled 020 1.5-inch head pin and make a wrapped loop at the top of the beads.
• Open the loop of a 2-inch gold-plated brass 21 gauge eye pin and attach the dangle you just made. Close the loop. Then, add an Arcadia bead, an opulence bead, a Gardanne Beads autumn orange enameled brass small bellflower bead cap, and a Russet Orange bead. Make a wrapped loop at the top of the beads. Set this dangle aside for now.
• Cut a length of Gold 24 Gauge Artbeads Designer Wire approximately 8 inches long. Coil one end of the wire around one side of the Nunn Design antique gold-plated brass large oval point ear wire. Coil it around several times. Then, add two Crystal Copper beads to the wire, followed by a Russet Orange bead, a Lt Teal bead, a Russet Orange bead, and two more Crystal Copper beads. Bring the wire across the open center of the earring and coil the other end of the wire around the other side of the earring. Trim any excess wire.
• Attach your dangle to the bottom of the earring using an oval jump ring.
• Repeat these steps to make the other earring.

Wrapped Loop Tutorial
Opening and Closing Jump Rings Video