$21.09

Bracelet Fairy Ergonomic Bracelet/Watch Fastener Tool

CODE: TOOL0317

Options

$21.09

Quantity:

in stock

Measurements & Specs

CODE:: TOOL0317
Sold:: Individually
Materials:: Acrylic or Lucite
Color:: Black

Description

Write a Review Ask a Question

Customers Also Viewed

Create beautiful knotted jewelry with the Easy Knotter knot-tying tool for beads and pearls. This is the perfect knot tying tool for all your beading needs and will help you tie evenly spaced knots. This essential tool is fast, accurate, and simple to use. Instructions for us are included with the tool. A good cord to use for your project is size 6 silk or nylon cord with a needle attached (try our Griffin silk options in the related products below). However with the Easy Knotter, you can use whatever cord you like as long as it knots (leather, suede, waxed linen, etc.). — Add to Cart

Create wrap bracelets with ease using the Wrapit Loom. This loom allows you to create a wrap bracelet of professional quality. This Professional Series kit includes one Wrapit Loom, one bead shaker, one shaker stand, 240 TOHO glass beads, 3 meters of cord, 4 meters of wrap string, four buttons, and instructions for use and assembly. A template is also included to help you create four different bracelet designs. The provided materials are sufficient to make one of each design. Get started creating gorgeous designs with this loom. Learn how to use The Wrapit Loom with our video tutorial. — Add to Cart

Create amazing bracelet designs with help from the Beadalon bangle bracelet weaver tool. This award-winning tool was designed by international designer, teacher and presenter Kleshna in collaboration with international craft wire specialists. It will help you create woven wire bracelets with ease. Use a variety of bead stringing wires in diameters 0.15 inches (0.38mm or 26 gauge) through .036 inches (0.91mm or 19 gauge). You can use the Beadalon Spool Tamer for each spool of wire to be used on the bangle. These measurements give the approximate width and size of Bangle Bracelets made with Beadalon bead stringing wires: .024 in (0.61mm) 49, 19 or 7 strand Beadalon wire 3.1 meters (10 ft) will make an approximately 17mm (0.67 in) wide Bangle Bracelet; .018 in (0.45mm) 49, 19 or 7 strand Beadalon wire 3.1meters (10 ft) will make an approximately 11mm (0.43 in) wide Bangle Bracelet; .015 in (0.38mm) 49, 19 or 7 strand Beadalon wire 3.1 meters (10 ft) will make an approximately 9mm (0.35 in) wide Bangle Bracelet. These widths may vary depending on how tight or loose the weft is done. Adding beads to the weft will change these widths. Easy to UseThe weaver tool is easy to use; I will have hours of fun making cuffs; the instructions were easy to follow; but watching video on your site was the real selling feature for meLee Ann, Serious Artbeader — Add to Cart

Create beautiful custom bead cones and bead caps with this amazing tool. The Conetastic Cone Mandrel Tool Set comes with three different cone sizes to get started with. The three cone mandrels fit inside the base of the tool for easy storage. You can easily change which mandrel you would like to use with the included Allen wrench. Includes the following Cone Mandrel sizes: 5mm x 2mm (0.20in x 0.08in), 8mm x 2mm (0.31in x 0.08in), and 11mm x 2mm(0.43in x 0.08in) — Add to Cart

Finish projects that incorporate tiny components faster than ever with the Pick-it-Up vacuum tool from The Beadsmith. This tool uses suction pressure to pick up small components such as Flatbacks and Chatons and accurately place them where you want in your designs. You no longer have to struggle with tweezers or wax tips. This tool works quickly to put your components in place, all while avoiding finger print marks on your designs and strain on your hands. This tool even comes with a rubber tip that is perfect for picking up larger components. The power control wheel adjusts suction for different sized items. With this vacuum tool, you can finish those intricate projects filled with small items in half the time. — Add to Cart

Make sure your wire is always ready for use with the Artistic Wire 3 roller wire straightener tool. This tool features three rollers that work together to give you straight wire every time. The rollers fold closed around your wire and you pull it through to straighten it. It's the easiest way to prepare your wire for designs. You'll love how fast and easy it is to use this tool. Instructions for use are included. — Add to Cart

Create jewelry more efficiently with the 1-step 2.25mm looper plier from The Beadsmith. This tool creates and trims eye pins in one motion. It forms and trims wire between 24 and 18 gauge, so you can use it for almost any project. The tool creates a 2.25mm loop, giving you more room to add components. Use this tool to quickly create your own dangles and links. You'll love how easy it is to work with the 1-Step Looper.See the 1-Step Looper in action in our 1-Step Looper Pliers Tutorial Video. Love This ToolOpen loops made perfect and easily.Michelle G., Serious Artbeader — Add to Cart

Create your own eye pins with The Beadsmith 1-Step 1.5mm Looper Plier. This tool allows you to trim and loop ready-made eye pins. You can even create eye pins in one motion. If you want to create custom length eye pins, you can do that, too. This tool works with precious metal wire, craft wire and copper or brass core wire. It bends and trims wire between 26 and 18 gauge in thickness. The looper will create a 1.5mm loop on wire 20 gauge or thicker, but it will leave a slight gap in the loop when using gauges thinner than 20 gauge. The 1-step looper is the perfect way to create professional-looking jewelry in no time. See the 1-Step Looper in action in our 1-Step Looper Pliers Tutorial Video. Worth every penny Best tool ever I can make the loops manually, but only 2-3 out of five are acceptable - to me anyway. With this tool, not only is it perfect each time, it collectively saves me hours on completing my jewelry piece. The other one is just as great. Worth every penny I paid for it. Dasha — Add to Cart

This nipper tool is designed for cutting soft lines, such as Beadalon 49, Beadalon 19, Beadalon 7, SuppleMax, Binding Wire, Elasticity, Stretch Magic, Beadalon Bead Cord, and more. Angled blades shear your stringing materials without fraying and they'll leave a smooth, clean edge. This tool is not recommended for cutting hard wires such as Remembrance or other spring-tempered material. — Add to Cart

Coil wires with ease using the Cobra Coiler wire tool. This tool comes with a mountable coiler, two mandrels that are 1/8-inch and 1/16-inch in diameter, instructions for use and a carrying case. With this tool, you can make coiled beads, beaded coils and everything in between. All you have to do is secure the Cobra Coiler to your work table, insert and tighten your desired mandrel, slide the wire into one of the slots, hold the wire with one hand and wind the crank with the other. You can also use other mandrels with this tool, from mandrels as thin as a pin to mandrels slightly thicker than 1/4-inch in diameter. Note: For a limited time, the Cobra Coiler will include an extra mandrel. This mandrel is shaped like a triangle, so you can make fun and interesting shapes within your jewelry. This extra mandrel is included with the Cobra Coiler only while supplies last, so make sure to get yours today. Love itI LOVE the Cobra Coiler and have made many nice things with the coils made from it. It is SUPER easy and works very niceLisa, Serious Artbeader — Add to Cart

You can use this beautiful leatherette zipper pouch to store your tools and keep them organized. It's perfect for travel, too. The inside of the case features nine elastic bands that will hold your tools securely in place, so it's a great solution for storage. The imitation leather displays a royal purple color. This case will be a life saver when you need all your tools in one place. — Add to Cart

Showcase a proud creature in your designs with this hand-painted bead. This bold bead is circular in shape and the front features a hand-painted scene of a beautiful black and orange tiger among green grass. The details in this focal have to be seen to be believed Each bead is signed by the artist who painted it, so you know you're getting a one-of-a-kind masterpiece. String this bead onto a head pin for a quick pendant or use it at the center of elaborate bead embroidery.This item is hand-painted, so appearances may vary. — Add to Cart

Nine superior precision-made beading tools are in this convenient leatherette zipper pouch. This is what you've been waiting for. Each tool is carefully chosen for use with your bead and jewelry designs. This thoughtfully assembled collection is perfect for beginning beaders or professional designers. Keep all your tools in one place with this handy kit. This tool kit includes: crimping pliers, a knot cutter, nylon jaw pliers, #5 knotting tweezers, a wire rounder, split ring tweezers, chain nose pliers, round nose pliers and a side cutter. — Add to Cart

When you want quick inspiration, use this Miyuki Fleurir bracelet kit. When you purchase this kit, you'll get everything you need to create a gorgeous garden-themed bracelet that comes with darling flower details. Each Miyuki kit comes with all of the components, including beads and thread. The fleurir bracelet is a gorgeous display of blue, green and golden seed beads accented by rich golden components. You'll also get a booklet that gives you step-by-step instructions with diagrams and a list of tools you will need. Give it as a gift for your favorite jewelry designers.Step-by-step instructions are included. — Add to Cart

With our Mighty Crimper tool and our crimp covers, you can now conceal your crimp tubes and beads with ease. Crimp covers are significantly bigger than crimp tubes and beads and will cover crimped beads up to 2x2mm in size. Regular crimping pliers may not work with them. That's where the Mighty Crimper tool comes in. It's a jumbo-sized crimping plier for crimp covers and crimp tubes 3mm or larger. Once your crimps have been crimped, slip the crimp cover over the top and use the Mighty Crimper to gently close the crimp cover. Instead of a crimp, you see what looks like a 3mm seamed bead. This is a great product that makes your crimped jewelry look professionally finished. This tool is made of the same quality steel as our other crimpers, but made of thicker metal and features a 2.2mm wide jaw, return spring, and heavy axle to assure longevity. Full instructions are included. — Add to Cart

Metallic beauty shines in this Ice Mountain Paths bracelet kit. This kit includes all of the beads, needle, thread, and directions for making a square and ladder stitch bracelet. This is an off-loom kit that looks like it was made on a loom. You'll love the silver and gold colors on display. Give it as a gift or make it for yourself. Enough beads are included to make a bracelet up to 9 inches in size.Makes a bracelet about 1 inch wide and up to 9 inches long. — Add to Cart

Give your designs shining finishing touches with this kumihimo toggle Kit. This terrific kit includes two ribbed cord ends, a toggle clasp set and two jump rings. The ends feature ribbed ends that attach well to your finished designs. Simply attach with a strong adhesive and add the toggle components using the included jump rings. These components all feature a lustrous silver glow that works well with all colors. Check out the rest of our Kumihimo tools and supplies for more high-quality products. You can also use this toggle kit with WireLuxe.Length 7.75mm, Width 16-16.5mm — Add to Cart

Add shining and professional finishing touches to your kumihimo designs with this kumihimo end cap and toggle kit. This cool kit includes two 10mm end caps, a toggle clasp set and two jump rings. Attach the end caps to your finished design with a tough adhesive and loop the jump rings through the findings. The toggle clasp features a fun bamboo design and all of the components are golden and shining. Find our Kumihimo braiding disk here. You can also get started easily with our Kumihimo braiding kit for beginners.Insert Diameter 9mm, Length 11mm — Add to Cart

Secure your earring designs with this clear rubber earwire clutch earring back. This clutch is made from clear medical-grade PVC that will not burn or tarnish silver. Since it is transparent, this earring back will not distract from your designs and will be barely visible on the earwire. This clutch fits the following earwires: SS-EAR01, SS-EAR03, SS-EAR08, SS-EAR09, SS-EAR12, SS-EAR13, SS-EAR18, SS-EAR19, SS-EAR-AMY, SS-EAR-BTO, SS-EAR-CIT, SS-EAR-CZ, SS-EAR-GT, SS-EAR-PER, GF-EAR02, GF-EARAMY, GF-EARBTO, GF-EARCZ, and GF-EARPER.Length 3mm, Width 3.5mm Brilliant ProductI'm going to include these with all the earrings I make from now on.Stef G., Serious Artbeader Minimum purchase quantity: 10 — Add to Cart

Looking to create unique and eye-catching metal bracelets for your handmade or DIY jewelry collection? Look no further than the BeadSmith Metal Elements EZ-Bender Cuff Bracelet Tool! This sleek and sturdy steel tool is designed to effortlessly bend metal bracelet blanks into perfect oval cuffs, without the need for a mallet. Simply insert the blank into the slot and let the leverage of the handle do all the work for you. With this tool, you'll be creating stunning metal bracelets in no time. Don't settle for ordinary jewelry - let the BeadSmith EZ-Bender help you create something truly extraordinary. — Add to Cart

Account

Sign In

Email Address:

Password:

Forgot your password? Create Account
- #seriousArtbeader