Slide a 6mm bicone in Ruby onto a Vintaj natural brass 1-inch 21 gauge eye pin and make a simple loop. Repeat 30 more times and set aside. You can use round nose pliers for this technique or the 1-Step Looper Pliers
Slide a 10mm baroque bead in Ruby onto a Vintaj natural brass 1.5-inch 21 gauge eye pin and make a simple loop. Repeat 3 more times and set aside.
Slide a 14mm baroque bead in Ruby onto a 1.5-inch eye pin and make a simple loop. Repeat 3 more times and set aside.
To create the outer strand of the necklace, link your beaded links together in the following pattern:
Three bicone links made in Step 1
One 14mm baroque bead link
Two bicone links
One 14mm baroque bead link
Two bicone links
One Vintaj natural brass 23x30mm Bangalore link
One bicone link
One Vintaj natural brass 5mm rib cable 18 gauge jump ring
One bicone link
One Bangalore link
Two bicone links
One 10mm baroque bead link
Two bicone links
One 10mm baroque bead link
Add three bicone links and then make a mirror image of the pattern above to finish the other side of the necklace.
Cut the Vintaj natural brass 3.5mm cable chain into one 2-inch piece and one 4-inch piece. Using one 5mm jump ring for each, add one 16mm baroque pendant in Ruby to the center link of each chain and set aside.
To create the center of the necklace, use one bicone link and attach it to the jump ring linking together the two bicone links between the Bangalore links on the right side of the main necklace strand. Now attach a Vintaj natural brass 21x15mm tiled metalwork link to the other end of the bicone link you just added. Use a 5mm jump ring to attach one end of both chain components made in Step 5 to the other end of the tiled metalwork link. Repeat this for the opposite side of the inner necklace strand.
To finish the necklace, attach a jump ring to one end of the necklace. Attach a Vintaj natural brass 9.5mm classic lobster clasp to the other end using another jump ring.
Add all available items to your cart at once or edit the quantities below.
Any items with quantities lower than stated minimums will default to the minimum in your cart.
Nice choice! All or most of the products needed for this project are shown
below with quantities. Sometimes we sell out of components and aren’t able to order more from
the manufacturer (we know, it is very disappointing to us, too). Use the opportunity to mix up
the design and make it yours by substituting similar products or altering the entire color
scheme—it’s up to you!
Vintaj Natural Brass 5mm Rib Cable 18 Gauge Jump Ring - Min Qty 10
Code FIND-2343
$0.15
×8
Vintaj Natural Brass 3.5mm Cable Chain by the Foot
Code BTF-1176
$4.27
×1
Step-by-Step Instructions
Slide a 6mm bicone in Ruby onto a Vintaj natural brass 1-inch 21 gauge eye pin and make a simple loop. Repeat 30 more times and set aside. You can use round nose pliers for this technique or the 1-Step Looper Pliers
Slide a 10mm baroque bead in Ruby onto a Vintaj natural brass 1.5-inch 21 gauge eye pin and make a simple loop. Repeat 3 more times and set aside.
Slide a 14mm baroque bead in Ruby onto a 1.5-inch eye pin and make a simple loop. Repeat 3 more times and set aside.
To create the outer strand of the necklace, link your beaded links together in the following pattern:
Three bicone links made in Step 1
One 14mm baroque bead link
Two bicone links
One 14mm baroque bead link
Two bicone links
One Vintaj natural brass 23x30mm Bangalore link
One bicone link
One Vintaj natural brass 5mm rib cable 18 gauge jump ring
One bicone link
One Bangalore link
Two bicone links
One 10mm baroque bead link
Two bicone links
One 10mm baroque bead link
Add three bicone links and then make a mirror image of the pattern above to finish the other side of the necklace.
Cut the Vintaj natural brass 3.5mm cable chain into one 2-inch piece and one 4-inch piece. Using one 5mm jump ring for each, add one 16mm baroque pendant in Ruby to the center link of each chain and set aside.
To create the center of the necklace, use one bicone link and attach it to the jump ring linking together the two bicone links between the Bangalore links on the right side of the main necklace strand. Now attach a Vintaj natural brass 21x15mm tiled metalwork link to the other end of the bicone link you just added. Use a 5mm jump ring to attach one end of both chain components made in Step 5 to the other end of the tiled metalwork link. Repeat this for the opposite side of the inner necklace strand.
To finish the necklace, attach a jump ring to one end of the necklace. Attach a Vintaj natural brass 9.5mm classic lobster clasp to the other end using another jump ring.